The information contained herein is exclusive property of ATTEND. Do not copy and print except that Attend

accepts. 本文件係屬立威科技股份有限公司所有；非經同意，不得以任何覆寫、拷貝、翻印等方式私自據有。亦不得擅加毀損、塗改。

-3 -

with lukewarm water and dry, and leaving in

ambient temperature for 1 hour.

Vibration

Contact Resistance:

100mΩ Max.

No appearance damage

Intermittency below 1µ

sec

Connect each connector pin in series, conducting

current of 0.1A. After that, the vibration described

below is added.



Amplitude: 1.5mm



Sweeping cycle:10~55~10 Hz/minute



Duration of test:2 hours for each of X, Y, Z axis

Shock

Connect each connector pin in series, conducting

current of 0.1A. After that, the shock described

below is added.



Accelerating rate:490m/s²



Operating time of the test:11ms



The number of operating times:

3 shocks at X, Y, Z axis both in negative and

positive direction.

Table 1 –Temperature Cycle

Step

Temperature (°C)

Time (minutes)

1

-30±3

30~35

2

5~35

10~15

3

60±2

30~35

4

5~35

10~15