© Nexperia B.V. 2017. All rights reserved

74HC4016

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 3 — 12 December 2016

4 of 21

Nexperia

74HC4016

Quad single-pole single-throw analog switch

7.

Limiting values

[1]

To avoid drawing VCC current out of terminal nZ, when switch current flows in terminals nY, the voltage drop across the bidirectional

switch must not exceed 0.4 V. If the switch current flows into terminal nZ, no VCC current will flow out of terminals nY. In this case there

is no limit for the voltage drop across the switch, but the voltages at nY and nZ may not exceed VCC or GND.

[2]

For SO14 package: Ptot derates linearly with 8 mW/K above 70 C.

For TSSOP14 packages: Ptot derates linearly with 5.5 mW/K above 60 C.

8.

Recommended operating conditions

Table 4.

Limiting values

In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).

Symbol

Parameter

Conditions

Min

Max

Unit

VCC

supply voltage

0.5

+11.0

V

IIK

input clamping current

VI < 0.5 V or VI >VCC +0.5 V

-

20

mA

ISK

switch clamping current

VSW < 0.5 V or VSW >VCC +0.5 V

-

20

mA

ISW

switch current

VSW = 0.5 V to VCC +0.5 V

[1]

-

25

mA

ICC

supply current

-+50

mA

IGND

ground current

50

-

mA

Tstg

storage temperature

65

+150

C

Ptot

total power dissipation

Tamb = 40 C to +125 C

[2]

SO14 and TSSOP14 packages

-

500

mW

P

power dissipation

per switch

-

100

mW

Table 5.

Recommended operating conditions

Symbol

Parameter

Conditions

Min

Typ

Max

Unit

VCC

supply voltage

2.0

5.0

10.0

V

VI

input voltage

GND

-

VCC

V

VSW

switch voltage

GND

-

VCC

V

Tamb

ambient temperature

40

+25

+125

C

t/V

input transition rise and fall

rate

VCC = 2.0 V

-

-

625

ns/V

VCC = 4.5 V

-

1.67

139

ns/V

VCC = 6.0 V

-

-

83

ns/V

VCC = 10.0 V

-

-

35

ns/V