PRINTED IN CANADA

Copyright © Greystone Energy Systems Inc. All Rights Reserved

www.greystoneenergy.com

PS-HATSGLXXX-02

Greystone Energy Systems, Inc.

150 English Drive, Moncton,

New Brunswick, Canada E1E 4G7

Ph: +1 (506) 853-3057 Fax: +1 (506) 853-6014

North America: 1-800-561-5611

E-mail: mail@greystoneenergy.com

HIGH ACCURACY GLASS TEMPERATURE SENSOR

HATSGL SERIES

PRODUCT DESCRIPTION

The high accuracy single point glass temperature

sensor utilizes a precision sensor encapsulated in

a 31.75mm L x 9.525mm W x 9.525 mm H (1.25”

x .375” x .375”) Aluminum probe. Standard wire

length is 1.524m (5’). All probes are constructed to

provide excellent heat transfer, fast response and

are potted to resist moisture penetration.

TYPICAL INSTALLATION

For complete installation and wiring details,

please refer to the product installation

instructions.

Find a suitable location on an exterior window

where the probe can be mounted. On one side

apply epoxy compound and press firmly against

the glass. Hold in place until the epoxy has set.

PRODUCT

HATSGLX High Accuracy Glass Temperature Sensor

SENSOR

18X

48X

22X

39X

55X

40X

46X

1000 Ω Platinum, 3 wire, IEC 751, 385 Alpha, thin film, Class A

1000 Ω Platinum, 3 wire, IEC 751, 385 Alpha, thin film, 1/3 DIN

1000 Ω Platinum, 3 wire, IEC 751, 385 Alpha, thin film, 1/10 DIN

10,000 Ω Type 2, NTC Thermistor, ±0.05°C

10,000 Ω Type 2, NTC Thermistor, ±0.03°C

10,000 Ω Type 3, NTC Thermistor, ±0.1°C

20,000 Ω NTC Thermistor, ±0.1°C

ORDERING

HATSGLX

PART NUMBER

NOTE: Greystone Energy Systems, Inc. reserves the right to make design modifications without prior notice.

NOTE: The sensor accuracies listed in the specifications section apply

to the sensing element only prior to product assembly and may not be

reflected in the complete assembly.

Due to the measurement uncertainty, it is possible, that the true

resistance value of the single delivered sensor at 0°C can be out of the

defined tolerance class. Profiling each assembly to take into consideration

lead wire and the attachment method should be completed.

SENSOR TYPE

Various Thermistor or RTD

SENSOR ACCURACY

RTD Class A: ±0.15°C (±0.27°F) @ 0°C (32°F)

RTD 1/3 DIN: ±0.1°C (±0.18°F) @ 0°C (32°F)

RTD 1/10 DIN: ±0.03°C (±0.054°F) @ 0°C (32°F)

NTC Thermistor Type 39: ±0.05°C (±0.09°F), 0 to 70°C (32 to 158°F)

NTC Thermistor Type 55: ±0.03°C (±0.054°F), 0 to 70°C (32 to 158°F)

NTC Thermistor Type 40/46: ±0.1°C (±0.18°F), 0 to 70°C (32 to 158°F)

PROBE SENSING RANGE

RTD: -20 to 100°C (-4 to 212°F)

Thermistors: -40 to 100°C (-40 to 212°F)

WIRE MATERIAL

RTD: FT-4, 22 AWG, 3 Wire

Thermistor: PVC insulated, parallel bonded, 22 AWG. 2 Wire

WIRE LENGTH

1.524m (5’)

PROBE MATERIAL

Aluminum

PROBE DIMENSIONS

31.75mm L x 9.525mm W x 9.525mm H (1.25” x 0.375” x 0.375”)

TERMINATION

Pigtail, 2 or 3 wire

COUNTRY OF ORIGIN

Canada

SPECIFICATIONS

31.75 mm

1.25"

9.525 mm

0.375"

Aluminum Probe

1.524 mm

5’