KBPC10 datasheet(4/4 Pages) ETC1

4 / 4 page

Ordering Information

Data Sheet

10 to 40 Amp

SINGLE PHASE SILICON BRIDGE

FCIS KBPC Series of Bridges Can Be Ordered with Options on Terminals and Case Materials.

How To Specify Case Material and Terminal Options:

n For Metal Case, Order Suffix (1) M

n For Plastic Case, Order Suffix (1) P

n For Faston Terminals, Order Suffix (2) F

n For Wire Lead Terminals, Order Suffix (2) W

n For a UL Recognized Device, Order Suffix (3) U

KBPC Series Examples

To Order a 25 Amp, 400 Volt Bridge with Faston Leads and a Plastic Case:

Specify - KBPC2504PF . . . Where P = Plastic and F = Faston Terminals

Case - Metal or Molded Plastic

Terminals - Plated .25" Faston or Plated Copper Wire

Leads .040" Diameter

Weight - 0.706 Ounces, 20 Grams

Mounting Position - Any with Bolt Down with Silicone

Thermal Compound Between Bridge and

Mounting Surface for Optimum Heat

Transfer

Mounting Torque - 20 Inch Pound Max

To Order a 35 Amp, 800 Volt Bridge with Wire Leads and a Metal Case:

Specify - KBPC3508MW . . . Where M = Metal and W = Wire Leads (Terminals)

To Order a 15 Amp, 200 Volt, UL Recognized Bridge with Wire Leads and a Plastic Case:

Specify - KBPC1502PWU . . . Where P = Plastic and W = Wire Leads (Terminals) and U = UL Recognized

NOTE: Fast Recovery Bridges (Diodes) Are Available; Please Contact FCI Components.

KBPC - S Series Examples

To Order Bridges with the In-Line Pin Configuration, Select the Current and Voltage Desired and Add S as the Suffix, as

shown in the following example.

To Order a 35 Amp, 800 Volt Bridge with In-Line Wire Leads:

Specify - KBPC3508S . . . Where S = In-Line Wire Lead Terminals

Page 3-31

DC Out

AC In

KBPC10 bảng dữ liệu(PDF) 4 Page - List of Unclassifed Manufacturers