AD5663 datasheet(13/24 Pages) AD

tên linh kiện	AD5663

Giải thích chi tiết về linh kiện	2.7 V to 5.5 V, 250 uA, Rail-to-Rail Output, Dual 16-Bit nanoDAC

PDF	24 Pages

Scroll/Zoom	100%

nhà sản xuất	AD [Analog Devices]

Trang chủ	http://www.analog.com

Logo

13 / 24 page

AD5663

Rev. 0 | Page 13 of 24

Analog Crosstalk

Analog crosstalk is the glitch impulse transferred to the output

of one DAC due to a change in the output of another DAC. It is

measured by loading one of the input registers with a full-scale

code change (all 0s to all 1s and vice versa) while keeping

LDAC high. Then pulse LDAC low and monitor the output of

the DAC whose digital code was not changed. The area of the

glitch is expressed in nV-s.

DAC-to-DAC Crosstalk

DAC-to-DAC crosstalk is the glitch impulse transferred to the

output of one DAC due to a digital code change and subsequent

output change of another DAC. This includes both digital and

analog crosstalk. It is measured by loading one of the DACs

with a full-scale code change (all 0s to all 1s and vice versa) with

LDAC low and monitoring the output of another DAC. The

energy of the glitch is expressed in nV-s.

Multiplying Bandwidth

The amplifiers within the DAC have a finite bandwidth. The

multiplying bandwidth is a measure of this. A sine wave on the

reference (with full-scale code loaded to the DAC) appears on

the output. The multiplying bandwidth is the frequency at

which the output amplitude falls to 3 dB below the input.

AD5663 bảng dữ liệu(PDF) 13 Page - Analog Devices