This document contains information on one or more products under development at Spansion LLC. The information is intended to help you eval-

uate this product. Do not design in this product without contacting the factory. Spansion LLC reserves the right to change or discontinue work

on this proposed product without notice.

Publication Number S71PL-J_00

Revision B Amendment 3 Issue Date March 17, 2006

Distinctive Characteristics

MCP Features

Power supply voltage of 2.7 V to 3.1 V

High performance

— 65 ns (65 ns Flash, 70 ns pSRAM)

Packages

— 7 x 9 x 1.2mm 56 ball FBGA

— 8 x 11.6 x 1.2mm 64 ball FBGA

— 8 x 11.6 x 1.4mm 84 ball FBGA

Operating Temperature

—–25°C to +85°C

—–40°C to +85°C

General Description

The S71PL series is a product line of stacked Multi-Chip Product (MCP) packages and consists

of:

One or more S29PL (Simultaneous Read/Write) Flash memory die

pSRAM or SRAM (See “Referenced Data Sheets” on page 2)

The 256Mb Flash memory consists of two S29PL127J devices. In this case, CE#f2 is used to

access the second Flash and no extra address lines are required.

The products covered by this document are listed in the table below:

Notes:

1. Not recommended for new designs; use pSRAM based MCPs instead.

2. Not recommended for new designs: use S71PL127N and S71PL256N instead.

S71PL-J Based MCPs

Stacked Multi-Chip Product (MCP) Flash Memory and

RAM 256M/128/64/32 Megabit (16/8/4/2M x 16-bit) CMOS 3.0

Volt-only Simultaneous Operation Page Mode Flash

Memory and 64/32/16/8/4 Megabit (4M/2M/1M/512K/256K x

16-bit) Static RAM/Pseudo Static RAM

Data Sheet

ADVANCE

INFORMATION

Flash Memory Density

32Mb

64Mb

128Mb (Note 2)

256Mb (Note 2)

pSRAM Density

4 Mb

S71PL032J40

8 Mb

S71PL032J80

S71PL064J80

16 Mb

S71PL032JA0

S71PL064JA0

32 Mb

S71PL064JB0

S71PL127JB0

64 Mb

S71PL127JC0

S71PL254JC0

Flash Memory Density

32Mb

64Mb

SRAM Density (Note 1)

4 Mb

S71PL032J04

8 Mb

S71PL032J08

S71PL064J08

16 Mb

S71PL064J0A