ASX00007 datasheet(20/49 Pages) ARDUINO

20 / 49 page

TAKE YOUR FIRST STEPS INTO THE INTERNET OF THINGS

WORLD.

ARDUINO UNO WIFI REV 2 with its onboard IMU

(Inertial Measurement Unit), a crypto-chip for secure

connections and encrypted communication over the network,

and WiFi is the ideal board to get started making your

first Internet of Things application, or for use in the

education field.

Arduino Uno WiFi Rev 2 has 14 digital input/output

pins (6 of which are PWM outputs), 6 analog inputs, a

16 MHz ceramic resonator, a power jack, and an ICSP

header. It contains everything needed to support the

microcontroller; simply connect it to a computer with a

USB cable or power it with an AC adapter or battery to get

started.

The WiFi module is a self contained SoC with an

integrated TCP/IP protocol stack that can provide access

to a WiFi network, or be set up as access point itself.

Arduino Uno WiFi Rev 2 supports OTA (over-the-air)

programming, either for transferring Arduino sketches or

for upgrading the WiFi firmware.

UNO WIFI REV2

COD:ABX00021

STORE.ARDUINO.CC/ARDUINO-UNO-WI-

FI-REV2

TECH SPECS:

MICROCONTROLLER

Microchip ATmega4809

OPERATING VOLTAGE 5V

INPUT VOLTAGE (RECOMMENDED) 7-12V

INPUT VOLTAGE (LIMIT) 6-20V

DIGITAL I/O PINS 14 (6 OF WHICH

PROVIDE PWM OUTPUT)

PWM DIGITAL I/O PINS 6

ANALOG INPUT PINS 6

DC CURRENT PER I/O PIN 20 mA

DC CURRENT FOR 3.3V PIN 50 mA

FLASH MEMORY 48 KB (ATMEGA4809)

SRAM 6,144 KB (ATMEGA4809)

EEPROM 256 bytes (ATMEGA4809)

CLOCK SPEED 16 MHz

ASX00007 bảng dữ liệu(PDF) 20 Page - Arduino