Specifications and information are subject to change without notice

WJ Communications, Inc

Phone 1-800-WJ1-4401 FAX: 408-577-6621

e-mail: sales@wj.com

Web site: www.wj.com

Page 3 of 3 March 2006

HMJ5

High Dynamic Range FET Mixer

Product Information

Outline Drawing

Dimensions are expressed in Inches.

TOLERANCE .XXX [ .015 .XX [ .02

Drawing is illustrated at Max dimensions.

Land Pattern / Mounting Configuration

Product Marking

The component will be marked with an

“HMJ7”

designator

with

a

four-digit

alphanumeric lot number XXXX.

Tape and reel specifications for this part are

located on the website in the “Application

Notes” section.

ESD Information

ESD Rating:

Class 2

Value:

Passes at 2000 V

Test:

Human Body Model (HBM)

Standard:

JEDEC Standard JESD22-A114

ESD Rating:

Class IV

Value:

Passes at 2000 V

Test:

Charged Device Model (CDM)

Standard:

JEDEC Standard JESD22-C101

Mounting Config. Notes

1. Ground vias are critical for thermal and RF grounding

considerations.

2. A minimum of 36 ground vias are required for 14 mil

FR4 boards.

3. If your PCB design rules allow, ground vias should be

placed under the land pattern for better RF and thermal

performance. Otherwise ground vias should be placed

as close to the land pattern as possible.

4.

Trace width depends on the PCB material.