ICS8745BYI REVISION D JUNE 11, 2009

2

©2009 Integrated Device Technology, Inc.

ICS8745BI Data Sheet

1:5 DIFFERENTIAL-TO-LVDS ZERO DELAY CLOCK GENERATOR

Table 1. Pin Descriptions

NOTE: Pullup and Pulldown refer to internal input resistors. See Table 2, Pin Characteristics, for typical values.

Table 2. Pin Characteristics

Number

Name

Type

Description

1, 2,

12, 29

SEL0, SEL1,

SEL2 SEL3

Input

Pulldown

Determines output divider values in Table 3. LVCMOS / LVTTL interface levels.

3

CLK0

Input

Pulldown

Non-inverting differential clock input.

4

nCLK0

Input

Pullup

Inverting differential clock input.

5

CLK1

Input

Pulldown

Non-inverting differential clock input.

6

nCLK1

Input

Pullup

Inverting differential clock input.

7

CLK_SEL

Input

Pulldown

Clock select input. When HIGH, selects CLK1,nCLK1. When LOW, selects CLK0,

nCLK0. LVCMOS / LVTTL interface levels.

8

MR

Input

Pulldown

Active HIGH Master Reset. When logic HIGH, the internal dividers are reset

causing the true outputs Qx to go low and the inverted outputs nQx to go high.

When logic LOW, the internal dividers and the outputs are enabled.

LVCMOS / LVTTL interface levels.

9, 32

VDD

Power

Core supply pins.

10

FBIN

Input

Pullup

Inverting differential feedback input to phase detector for regenerating clocks with

“Zero Delay.”

11

FBIN

Input

Pulldown

Non-inverted differential feedback input to phase detector for regenerating clocks

with “Zero Delay.”

13, 19, 25

GND

Power

Power supply ground.

14, 15

nQ0/Q0

Output

Differential output pair. LVDS interface levels.

16, 22, 28

VDDO

Power

Output supply pins.

17, 18

nQ1/Q1

Output

Differential output pair. LVDS interface levels.

20, 21

nQ2/Q2

Output

Differential output pair. LVDS interface levels.

23, 24

nQ3/Q3

Output

Differential output pair. LVDS interface levels.

26, 27

nQ4/Q4

Output

Differential output pair. LVDS interface levels.

30

VDDA

Power

Analog supply pin.

31

PLL_SEL

Input

Pullup

PLL select. Selects between the PLL and reference clock as the input to the

dividers. When LOW, selects reference clock. LVCMOS/LVTTL interface levels.

Symbol

Parameter

Test Conditions

Minimum

Typical

Maximum

Units

CIN

Input Capacitance

4pF

RPULLUP

Input Pullup Resistor

51

k

Ω

RPULLDOWN

Input Pulldown Resistor

51

k

Ω