| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
MB90F482 bảng dữ liệu(PDF) 85 Page - fujitsu semiconductor |
|
|
|||||||||||||||||||||||||||||
MB90F482 bảng dữ liệu(HTML) 85 Page - fujitsu semiconductor |
|
85 / 113 page ![]() MB90480/485 Series 85 3.6 2.7 3.0 4 1.5 16 25 16 12 25 8 4 34 8 12.5 16 25 20 32 50 20 6 1.5 9 18 24 5 6 10 40 Range of warranted PLL operation Normal operating range Internal clock fCP (MHz) Internal operating clock frequency vs. Power supply voltage Base oscillator frequency vs. Internal operating clock frequency Base oscillator clock FCH (MHz) • Range of warranted PLL operation Notes: • For A/D operating frequency, refer to “5. A/D Converter Electrical Characteristics” • Only at 1 multiplied PLL, use with more than fcp = 4 MHz. No multiplied *1 : In setting as 1, 2, 3 and 4 multiplied PLL, when the internal clock is used at 20 MHz < fcp ≤ 25 MHz, set the PLLOS register to “DIV2 bit = 1” and “PLL2 bit = 1”. [Example] When using the base oscillator frequency of 24 MHz at 1 multiplied PLL : CKSCR register : CS1 bit = “0”, CS0 bit = “0” PLLOS register : DIV2 bit = “1”, PLL2 bit = “1” [Example] When using the base oscillator frequency of 6 MHz at 3 multiplied PLL : CKSCR register : CS1 bit = “1”, CS0 bit = “0” PLLOS register : DIV2 bit = “1”, PLL2 bit = “1” *2 : In setting as 2 and 4 multiplied PLL, when the internal clock is used at 20 MHz < fcp ≤ 25 MHz, the following setting is also enabled. 2 multiplied PLL : CKSCR register : CS1 bit = “0”, CS0 bit = “0” PLLOS register : DIV2 bit = “0”, PLL2 bit = “1” 4 multiplied PLL : CKSCR register : CS1 bit = “0”, CS0 bit = “1” PLLOS register : DIV2 bit = “0”, PLL2 bit = “1” *3 : When using in setting as 6 and 8 multiplied PLL, set the PLLOS register to “DIV2 bit = 0” and “PLL2 bit = 1”. [Example] When using the base oscillator frequency of 4 MHz at 6 multiplied PLL : CKSCR register : CS1 bit = “1”, CS0 bit = “0” PLLOS register : DIV2 bit = “0”, PLL2 bit = “1” [Example] When using the base oscillator frequency of 3 MHz at 8 multiplied PLL : CKSCR register : CS1 bit = “1”, CS0 bit = “1” PLLOS register : DIV2 bit = “0”, PLL2 bit = “1” 1 × *1 2 × *1,*2 3 × *1 4 × *1,*2 6 × *3 8 × *3 |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |