FSP200-P35 Series

FEATURES

•

Class-I design

•

Design to meet IEC 60950-1, IEC 60065-1, IEC 62368-1 & IEC

61558-1 (optional *note1) safety standard

•

Low profile 3 x 5 x 1.284 inches

•

No load power consumption less than 0.21W

•

EN 55032 Class B radiated emission

•

High altitude 5000 meters operation

•

OTP, Brown out protection

•

Fan driver 12V

DESCRIPTION

This AC-DC switching power supplies in a package of 3 x 5 inches is a Class-I PSU and no load power consumption less than 0.21W.

This PSU is capable of delivering 200 watts continuous power at 7 CFM forced air cooling or 150 watts continuous power at convection

cooling and 50℃ operation temperature. Product is suitable for audio & video, display, house hold (Europe), information, and

networking application

INPUT SPECIFICATIONS

Input voltage:

Input frequency:

Input current:

No load power consumption

Earth leakage current:

Touch current:

90-264 VAC

47-63 Hz

1.7 A (rms) for 115 VAC

0.8 A (rms) for 230 VAC

≦

0.21W

0.75 mA max. @ 264 VAC, 63 Hz

0.25 mA max. @ 264 VAC, 63 Hz

GENERAL SPECIFICATIONS

Power factor:

Efficiency:

Power turn-on time:

Hold-up time:

Line regulation:

Inrush current:

Operating altitude:

Withstand voltage:

Isolation Resistance:

MTBF:

EMC Performance

EN55032

FCC:

VCCI:

EN61000-3-2:

EN61000-3-3:

EN61000-4-2:

EN61000-4-3:

EN61000-4-4:

EN61000-4-5:

EN61000-4-6:

EN61000-4-8:

EN61000-4-11:

0.98 minimum @ 115VAC & 100% load

0.93 minimum @ 230VAC & 100% load

See rating chart.

1.5 Sec maxi.

20 mS minimum at 115 VAC @ 150W

8 mS minimum at 115VAC @ 200W

±0.5% maximum at full load

40 A @ 115 VAC, at 25℃ cold start, 150W

80 A @ 230 VAC, at 25℃ cold start, 150W

5000 meters above sea level

3000 VAC from input to output,

1500 VAC from input to ground,

1500 VAC from output to ground

Input to output 100M ohm @ 500Vdc, 25℃

400,000 hours mini. at full load at 25℃ ambient, calculaed

per TELCORDIA SR-332

Class B conducted, class B radiated

Class B conducted, class B radiated

Class B conducted, class B radiated

Harmonic distortion, class A and D

Line flicker

ESD, ±8 KV air and ±4 KV contact

Radiated immunity, 3 V/m

Fast transient/burst, ±1 KV

Surge, ±1 KV diff., ±2 KV com

Conducted immunity, 3 Vrms

Magnetic field immunity, 1 A/m

Voltage dip immunity,

30% reduction for 500 ms, criteria A

>95% reduction for 10 ms, criteria A

>95% reduction for 5000 mS, criteria B

OUTPUT SPECIFICATIONS

Output voltage/current:

Fan driver:

Total output power:

Protection:

Over voltage:

Short circuit:

Over current:

Over temperature:

Brown out:

Temperature coefficient:

Transient response:

ENVIRONMENTAL SPECIFICATIONS

Operating temperature

Storage temperature

Relative humidity:

Derating:

See rating chart.

Non-regulated 12V @ 500 mA max.

200W

Latch off

Auto recovery

Auto recovery

Latch off

Set at 75VAC

All outputs ±0.04% /℃ maximum

Maximum excursion of 4% or better on

all models, recovering to 1% of final

value within 500 us after a 25% step

load change

-20℃~+70℃

-40℃~+85℃

5% to 95% non-condensing

Derate from 100% at +50℃ linearly to

50% at +70℃, applicable to both

convection and forced-air cooling

conditions

SAFETY STANDARD APPROVAL

1

www.fsp-group.com.tw

TECHNICAL DATASHEET

200W ITE POWER SUPPLIES

FSP200-P35 Series

© 2022 FSP Group. All Rights Reserved. All trademarks are registered to their respective owners.

2022.10 spec

188668

C

US