ISL71841SEH

FN8735 Rev. 7.00

Page 3 of 30

Feb 23, 2018

Ordering Information

ORDERING NUMBER

(Note 4)PART NUMBER

TEMP RANGE

(°C)

PACKAGE

PKG.

DWG. #

5962R1522001VXC

ISL71841SEHVF (Note 2)

-55 to +125

48 LD CQFP (RoHS Compliant)

R48.A

N/A

ISL71841SEHF/PROTO (Notes 2, 5)

-55 to +125

48 LD CQFP (RoHS Compliant)

R48.A

5962R1522001VYA

ISL71841SEHVL (Note 3)

-55 to +125

44 LD CLCC

J44.A

N/A

ISL71841SEHL/PROTO (Notes 3, 5)

-55 to +125

44 LD CLCC

J44.A

5962R1522001V9A

ISL71841SEHVX

-55 to +125

Die (RoHS Compliant)

N/A

ISL71841SEHX/SAMPLE (Note 5)

-55 to +125

Die (RoHS Compliant)

N/A

ISL71841SEHEV1Z (Note 6)

Evaluation Board

NOTES:

2. These Pb-free Hermetic packaged products employ 100% Au plate - e4 termination finish, which is RoHS compliant and compatible with both SnPb

and Pb-free soldering operations.

3. These Hermetic Packaged products are intended for SnPb soldering and may be shipped with terminations precoated with SnPb solder compatible

with SnPb soldering operations only.

4. Specifications for Rad Hard QML devices are controlled by the Defense Logistics Agency Land and Maritime (DLA). The SMD numbers listed must be

used when ordering.

5. The /PROTO and /SAMPLE are not rated or certified for Total Ionizing Dose (TID) or Single Event Effect (SEE) immunity. These parts are intended for

engineering evaluation purposes only. The /PROTO parts meet the electrical limits and conditions across the temperature range specified in the DLA

SMD and are in the same form and fit as the qualified device. The /SAMPLE die is capable of meeting the electrical limits and conditions specified

in the DLA SMD at +25°C only. The /SAMPLE is a die and does not receive 100% screening across the temperature range to the DLA SMD electrical

limits. These part types do not come with a certificate of conformance because there is no radiation assurance testing and they are not DLA qualified

devices.

6. Evaluation board uses the /PROTO parts. The /PROTO parts are not rated or certified for Total Ionizing Dose (TID) or Single Event Effect (SEE) immunity.

TABLE 1. TABLE OF DIFFERENCES

SPECIFICATION

ISL71840SEH

ISL71841SEH

Number of Channels

16

32

Supply Current (I+/I-)

350µA (maximum)

400µA (maximum)

Output Leakage (+125°C)

60nA (maximum)

120nA (maximum)