6 Specifications

6.1 Absolute Maximum Ratings

over operating ambient temperature range (unless otherwise noted)(1)

MIN

MAX

UNIT

Supply voltage, VS = (V+) – (V–)

0

42

V

Signal input pins

Common-mode voltage(3)

(V–) – 0.5

(V+) + 0.5

V

Differential voltage(3)

VS + 0.2

V

Current(3)

–10

10

mA

Output short-circuit(2)

Continuous

Operating ambient temperature, TA

–55

150

°C

Junction temperature, TJ

150

°C

Storage temperature, Tstg

–65

150

°C

(1)

Operating the device beyond the ratings listed under Absolute Maximum Ratings will cause permanent damage to the device.

These are stress ratings only, based on process and design limitations, and this device has not been designed to function outside

the conditions indicated under Recommended Operating Conditions. Exposure to any condition outside Recommended Operating

Conditions for extended periods, including absolute-maximum-rated conditions, may affect device reliability and performance.

(2)

Short-circuit to ground, one amplifier per package. Extended short-circuit current, especially with higher supply voltage, can cause

excessive heating and eventual destruction.

(3)

Input pins are diode-clamped to the power-supply rails. Input signals that may swing more than 0.5 V beyond the supply rails must be

current limited to 10 mA or less.

6.2 ESD Ratings

VALUE

UNIT

OPA992-Q1

Electrostatic discharge

Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001(1)

±2000

V

Charged-device model (CDM), per ANSI/ESDA/JEDEC JS-002(2)

±1500

OPA2992-Q1 and OPA4992-Q1

Electrostatic discharge

Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001(1)

±2500

V

Charged-device model (CDM), per ANSI/ESDA/JEDEC JS-002(2)

±1500

(1)

JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.

(2)

JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.

6.3 Recommended Operating Conditions

over operating ambient temperature range (unless otherwise noted)

MIN

MAX

UNIT

VS

Supply voltage, (V+) – (V–)

2.7

40

V

VI

Common mode voltage range

(V–)

(V+)

V

TA

Specified temperature

–40

125

°C

OPA992-Q1, OPA2992-Q1, OPA4992-Q1

SBOSAC9D – AUGUST 2022 – REVISED APRIL 2023

www.ti.com

6

Submit Document Feedback

Copyright © 2023 Texas Instruments Incorporated

Product Folder Links: OPA992-Q1 OPA2992-Q1 OPA4992-Q1