ST25R3916B datasheet(18/165 Pages) STMICROELECTRONICS

tên linh kiện	ST25R3916B

Giải thích chi tiết về linh kiện	NFC reader for payment, consumer and industrial applications

PDF	165 Pages

Scroll/Zoom	100%

nhà sản xuất	STMICROELECTRONICS [STMicroelectronics]

Trang chủ	http://www.st.com

Logo

18 / 165 page

Description

ST25R3916B ST25R3917B

18/165

DS13541 Rev 7

In Transparent mode the framing and FIFO are bypassed. The digitized subcarrier signal

directly drives the MISO pin.

2.2.13

FIFO

The ST25R3916B and ST25R3917B contain a 512-byte FIFO. Depending on the direction

of the data transfer, it contains either data which has been received or data which is to be

transmitted.

In reader mode the ST25R3916B and ST25R3917B can transmit frames of up to 8191 bytes

length and receive frames of arbitrary length.

2.2.14

Control logic

The control logic contains I/O registers that define the operation of device.

2.2.15

Host interface

A 4-wire serial peripheral interface (SPI) and a 2-wire I2C interface are available to

communicate with an external microcontroller. The pins for the SPI and the I2C interface are

shared, and pin I2C_EN is used to select the active interface.

2.2.16

Passive target memory

The device contains a 48-byte RAM to store configuration data for the passive target and

card emulation mode.

2.2.17

P2RAM

The P2RAM stores information on wafer number, die position, device subversion, and I2C

address. The P2RAM is programmed during production.

ST25R3916B bảng dữ liệu(PDF) 18 Page - STMicroelectronics