RRZZHHTT-65B-R7N43

©2022 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,

respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the

most current information. Revised: August 29, 2022

Page of

1

5

16-port sector antenna, 4x 694–960, 4x 1427–2690, 4x 1695-2180 and

4x 2490-2690 MHz, 65° HPBW, 7x RET

All Internal RET actuators are connected in “Cascaded SRET” configuration

Supports re-configurable antenna sharing capability enabling control of the internal RET system

using up to two separate RET compatible OEM radios

Array configuration provides capability for 4T4R (4x MIMO) on Low band and High band

Retractable tilt indicator rods

Antenna shape optimized for wind load reduction

General Specifications

Antenna Type

Sector

Band

Multiband

Color

Light Gray (RAL 7035)

Grounding Type

RF connector inner conductor and body grounded to reflector and mounting

bracket

Performance Note

Outdoor usage

Radome Material

Fiberglass, UV resistant

Reflector Material

Aluminum

RF Connector Interface

4.3-10 Female

RF Connector Location

Bottom

RF Connector Quantity, mid band

12

RF Connector Quantity, low band

4

RF Connector Quantity, total

16

Remote Electrical Tilt (RET) Information

RET Hardware

CommRET v2

RET Interface

8-pin DIN Female    |   8-pin DIN Male

RET Interface, quantity

2 female    |   2 male

Input Voltage

10–30 Vdc

Internal RET

Low band (2)    |   Mid band (5)

Power Consumption, active state, maximum

8 W

Power Consumption, idle state, maximum

1 W

Protocol

3GPP/AISG 2.0 (Single RET)