ST

www.vishay.com

Vishay

Upgrade for High Shock and Vibration Performance With T16

Revision: 12-May-2022

5

Document Number: 43000

For technical questions, contact: tantalum@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

ENVIRONMENTAL CHARACTERISTICS

ITEM

CONDITION

COMMENTS

Seal

MIL-PRF-39006

When the capacitors are tested as specified in MIL-PRF-39006,

there shall be no evidence of leakage.

Moisture resistance

MIL-PRF-39006

Moisture resistance shall be in accordance with MIL-PRF-39006.

Number of cycles: 10 continuous cycles

Barometric pressure

(reduced)

MIL-STD-202, method 105, condition E

Altitude 150 000 feet

MECHANICAL CHARACTERISTICS

ITEM

CONDITION

COMMENTS

Shock (specified pulse)

MIL-STD-202, method 213, condition I

(100 g)

The capacitors shall meet the requirements of MIL-PRF-39006.

Vibration, high frequency

MIL-STD-202, method 204, condition D

(20 g peak)

The capacitors shall meet the requirements of MIL-PRF-39006.

Thermal shock

MIL-STD-202, method 107, condition A

Thermal shock shall be in accordance with MIL-PRF-39006 when

tested for 30 cycles.

Solderability

MIL-STD-202, method 208,

ANSI/J-STD-002, test A

Solderability shall be in accordance with MIL-PRF-39006.

Terminal strength

MIL-STD-202, method 211

Terminal strength shall be in accordance with MIL-PRF-39006.

Resistance to solder heat

MIL-STD-202, method 210, condition C

The capacitors shall meet the requirements of MIL-PRF-39006.

Terminals

MIL-STD-1276

Terminals shall be as specified in MIL-STD-1276. The length and

diameter of the terminals shall be as specified in Dimensions table.

All terminals shall be permanently secured internally and

externally, as applicable. All external joints shall be welded.

Marking

MIL-STD-1285

Marking of capacitors conforms to method I of MIL-STD-1285 and

include capacitance (in μF), capacitance tolerance letter, rated

voltage, date code, lot symbol and Vishay trademark.

SELECTOR GUIDES

Tantalum Selector Guide

www.vishay.com/doc?49054

Parameter Comparison Guide

www.vishay.com/doc?42088