| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
PIC16F15213T-I/ST bảng dữ liệu(PDF) 312 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
PIC16F15213T-I/ST bảng dữ liệu(HTML) 312 Page - Microchip Technology |
|
312 / 439 page ![]() 25.4.7 SSPxCON3 Name: SSPxCON3 Offset: 0x0192 MSSP Control Register 3 Bit 7 6 5 4 3 2 1 0 ACKTIM PCIE SCIE BOEN SDAHT SBCDE AHEN DHEN Access R/HS/HC R/W R/W R/W R/W R/W R/W R/W Reset 0 0 0 0 0 0 0 0 Bit 7 – ACKTIM Acknowledge Time Status bit Value Mode Description x SPI or I2C Host This bit is not used 1 I2C Client and AHEN = 1 or DHEN = 1 Eighth falling edge of SCL has occurred and the ACK/NACK state is Active 0 I2C Client ACK/NACK state is not Active. Transitions low on ninth rising edge of SCL. Bit 6 – PCIE Stop Condition Interrupt Enable bit Value Mode Description x SPI or SSPM = 1111 or 1110 This bit is not used 1 SSPM ≠ 1111 and SSPM ≠ 1110 Enable interrupt on detection of Stop condition 0 SSPM ≠ 1111 and SSPM ≠ 1110 Stop detection interrupts are disabled Bit 5 – SCIE Start Condition Interrupt Enable bit Value Mode Description x SPI or SSPM = 1111 or 1110 This bit is not used 1 SSPM ≠ 1111 and SSPM ≠ 1110 Enable interrupt on detection of Start condition 0 SSPM ≠ 1111 and SSPM ≠ 1110 Start detection interrupts are disabled Bit 4 – BOEN Buffer Overwrite Enable bit(1) Value Mode Description 1 SPI SSPxBUF is updated every time a new data byte is available, ignoring the BF bit 0 SPI If a new byte is receive with BF set then SSPOV is set and SSPxBUF is not updated 1 I2C SSPxBUF is updated every time a new data byte is available, ignoring the SSPOV effect on updating the buffer 0 I2C SSPxBUF is only updated when SSPOV is clear Bit 3 – SDAHT SDA Hold Time Selection bit Value Mode Description x SPI Not used in SPI mode 1 I2C Minimum of 300 ns hold time on SDA after the falling edge of SCL 0 I2C Minimum of 100 ns hold time on SDA after the falling edge of SCL Bit 2 – SBCDE Client Mode Bus Collision Detect Enable bit Unused in Host mode. Value Mode Description x SPI or I2C Host This bit is not used 1 I2C Client Bus Collision detection is enabled 0 I2C Client Bus Collision detection is not enabled PIC16F15213/14/23/24/43/44 MSSP - Host Synchronous Serial Port Module © 2020-2022 Microchip Technology Inc. and its subsidiaries Data Sheet DS40002195E-page 312 |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |