| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
PIC16F15213T-I/ST bảng dữ liệu(PDF) 308 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
PIC16F15213T-I/ST bảng dữ liệu(HTML) 308 Page - Microchip Technology |
|
308 / 439 page ![]() 25.4.5 SSPxCON1 Name: SSPxCON1 Offset: 0x0190 MSSP Control Register 1 Bit 7 6 5 4 3 2 1 0 WCOL SSPOV SSPEN CKP SSPM[3:0] Access R/W/HS R/W/HS R/W R/W R/W R/W R/W R/W Reset 0 0 0 0 0 0 0 0 Bit 7 – WCOL Write Collision Detect bit Value Mode Description x Host or Client receive This bit is not used 1 SPI or I2C Host or Client transmit The SSPxBUF register is written while it is still transmitting the previous word (must be cleared in software) 0 SPI or I2C Host or Client transmit No collision Bit 6 – SSPOV Receive Overflow Indicator bit(1) Value Mode Description x SPI Host or I2C Host transmit This bit is not used 1 SPI Client A byte is received while the SSPxBUF register is still holding the previous byte. Data contained in the shift register will be discarded. The user must read SSPxBUF, even if only transmitting data, to avoid setting overflow (must be cleared in software). 1 I2C Receive A byte is received while the SSPxBUF register is still holding the previous byte (must be cleared in software) 0 SPI Client or I2C Receive No overflow Bit 5 – SSPEN Host Synchronous Serial Port Enable bit.(2) Value Description 1 Enables the serial port 0 Disables serial port and configures these pins as I/O PORT pins Bit 4 – CKP SCK Release Control bit Value Mode Description x I2C Host This bit is not used 1 SPI Idle state for the clock is a high level 0 SPI Idle state for the clock is a low level 1 I2C Client Releases clock 0 I2C Client Holds clock low (clock stretch), used to ensure data setup time Bits 3:0 – SSPM[3:0] Host Synchronous Serial Port Mode Select bits(4) Value Description 1111 I2C Client mode: 10-bit address with Start and Stop bit interrupts enabled 1110 I2C Client mode: 7-bit address with Start and Stop bit interrupts enabled 1101 Reserved - do not use 1100 Reserved - do not use 1011 I2C Firmware Controlled Host mode (client Idle) PIC16F15213/14/23/24/43/44 MSSP - Host Synchronous Serial Port Module © 2020-2022 Microchip Technology Inc. and its subsidiaries Data Sheet DS40002195E-page 308 |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |