SN65CML100

SLLS547 – NOVEMBER 2002

www.ti.com

2

Thesedevices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during

storage or handling to prevent electrostatic damage to the MOS gates.

ORDERING INFORMATION

PART NUMBER

PART MARKING

PACKAGE

STATUS

SN65CML100D

CML100

SOIC

Production

SN65CML100DGK

NWB

MSOP

Production

ABSOLUTE MAXIMUM RATINGS

over operating free-air temperature range unless otherwise noted(1)

UNIT

Supply voltage range,(2) VCC

–0.5 V to 4 V

Sink/source, IBB

±0.5 mA

Voltage range, (A, B, Y, Z)

0 V to 4.3 V

Human Body Model(3)

A, B, Y, Z, and GND

±5 kV

Electrostatic discharge

Human Body Model(3)

All pins

±2 kV

Electrostatic discharge

Charged-DeviceModel(4)

All pins

±1500 V

Continuous power dissipation

See Dissipation Rating Table

Storage temperature range, Tstg

–65

°C to 150°C

Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds

260

°C

(1) Stressesbeyondthoselistedunder“absolutemaximumratings”maycausepermanentdamagetothedevice.Thesearestressratingsonly,and

functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not

implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

(2) All voltage values, except differential I/O bus voltages, are with respect to network ground terminal.

(3) Tested in accordance with JEDEC Standard 22, Test Method A114-A.7.

(4) Tested in accordance with JEDEC Standard 22, Test Method C101.

RECOMMENDED OPERATING CONDITIONS

MIN

NOM

MAX

UNIT

Supply voltage, VCC

3

3.3

3.6

V

3.3-V nominal supply at terminator

3

3.3

3.6

V

Terminator supply voltage, VTT

2.5-V nominal supply at terminator

2.375

2.5

2.625

V

Terminator su

ly voltage, VTT

1.8-V nominal supply at terminator

1.7

1.9

V

Magnitude of differential input voltage |VID|

0.1

1

V

Input voltage (any combination of common-mode or input signals)

0

4

V

Output current, VBB

400

µA

Operating free-air temperature, TA

–40

85

°C