| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
74F151 bảng dữ liệu(PDF) 5 Page - NXP Semiconductors |
|
|
|||||||||||||||||||||||||||||
74F151 bảng dữ liệu(HTML) 5 Page - NXP Semiconductors |
|
5 / 10 page ![]() Philips Semiconductors Product specification 74F151A 8-input multiplexer 1995 Jul 17 5 DC ELECTRICAL CHARACTERISTICS (Over recommended operating free-air temperature range unless otherwise noted.) NO TAG LIMITS SYMBOL PARAMETER\ TEST CONDITIONSNO TAG MIN TYP NO TAG MAX UNIT VO High level output voltage VCC = MIN, VIL = MAX, ±10%V CC 2.5 V VOH High-level output voltage CC , IL , VIH = MIN, IOH = MAX ±5%V CC 2.7 3.4 V VO Low level output voltage VCC = MIN, VIL = MAX, ±10%V CC 0.30 0.50 V VOL Low-level output voltage CC , IL , VIH = MIN, IOL = MAX ±5%V CC 0.30 0.50 V VIK Input clamp voltage VCC = MIN, II = IIK –0.73 –1.2 V II Input current at maximum input voltage VCC = MAX, VI = 7.0V 100 µA IIH High-level input current VCC = MAX, VI = 2.7V 20 µA IIL Low-level input current VCC = MAX, VI = 0.5V –0.6 mA IOS Short-circuit output currentNO TAG VCC = MAX –60 –150 mA ICC Supply current (total) ICCH VCC = MAX 18 25 mA ICC Supply current (total) ICCL VCC = MAX 17 25 mA NOTES: 1. For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions for the applicable type. 2. All typical values are at VCC = 5V, Tamb = 25°C. 3. Not more than one output should be shorted at a time. For testing IOS, the use of high-speed test apparatus and/or sample-and-hold techniques are preferable in order to minimize internal heating and more accurately reflect operational values. Otherwise, prolonged shorting of a High output may raise the chip temperature well above normal and thereby cause invalid readings in other parameter tests. In any sequence of parameter tests, IOS tests should be performed last. AC ELECTRICAL CHARACTERISTICS LIMITS SYMBOL PARAMETER TEST CONDITION VCC = +5.0V Tamb = +25°C CL = 50pF RL = 500Ω VCC = +5.0V ± 10% Tamb = 0°C to +70°C CL = 50pF RL = 500Ω UNIT MIN TYP MAX MIN MAX tPLH tPHL Propagation delay In to Y Waveform NO TAG 2.5 2.5 4.5 4.5 7.0 7.0 2.5 2.5 7.5 7.5 ns tPLH tPHL Propagation delay In to Y Waveform NO TAG 2.0 1.0 4.0 2.0 7.0 4.5 2.0 1.0 7.5 5.0 ns tPLH tPHL Propagation delay Sn to Y Waveform 1, 2 4.5 4.0 6.5 6.0 10.0 8.5 4.0 3.5 11.0 9.5 ns tPLH tPHL Propagation delay Sn to Y Waveform NO TAG, NO TAG 3.5 2.5 5.5 4.5 8.5 7.0 3.0 2.0 9.5 7.5 ns tPLH tPHL Propagation delay E to Y Waveform 1 4.0 3.0 6.5 5.0 9.0 7.0 3.5 3.0 9.5 7.5 ns tPLH tPHL Propagation delay E to Y Waveform NO TAG 2.5 2.0 4.5 3.5 6.5 5.5 2.5 1.5 7.0 6.0 ns AC WAVEFORMS For all waveforms, VM = 1.5V |
|
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |