GaAs Broadband DPDT Diversity Switch

0.5 - 3.0 GHz

MASWSS0130

M/A-COM Inc. and its affiliates reserve the right to make changes to the

product(s) or information contained herein without notice. M/A-COM makes

no warranty, representation or guarantee regarding the suitability of its

products for any particular purpose, nor does M/A-COM assume any liability

whatsoever arising out of the use or application of any product(s) or

information.

• North America Tel: 800.366.2266 / Fax: 978.366.2266

• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300

• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298

Visit www.macom.com for additional data sheets and product information.

V5

2

RoHS

Compliant

Parameter

Absolute Maximum

Input Power @ 3 V Control

+35 dBm

Input Power @ 5 V Control

+35 dBm

Operating Voltage

+8.5 volts

Operating Temperature

Storage Temperature

Parameter

Test Conditions

Units

Min.

Typ.

Max.

2.4 GHz

dB

0.6

0.9

Isolation

(on/off or off/on)

2.4 GHz

dB

20

25

Return Loss

2.4 GHz

dB

23

IP2

Two Tone, +15 dBm per tone, 5 MHz Spacing,

2.4 GHz

dBm

94

IIP3

Two Tone, +15 dBm per tone, 5 MHz Spacing,

2.4 GHz

dBm

55

Input P1dB

2.4 GHz

dBm

34

dBm

-80

dBm

-95

Trise, Tfall

10% to 90% RF

90% to 10% RF

nS

nS

34

35

Ton, Toff

50% control to 90% RF

50% control to 10% RF

nS

48

54

Transients

mV

7

Control Current

|Vc| = 3 V

µA

5

25

Input P0.1dB

2.4 GHz

dBm

30

2. External DC blocking capacitors are required on all RF ports.

3. Insertion loss can be optimized by varying the DC blocking capacitor value.

2,3

Qualification

Qualified to M/A-COM specification REL-201,

Process Flow –2.

Handling Procedures

Please observe the following precautions to avoid

damage:

Static Sensitivity

Gallium Arsenide Integrated Circuits are sensitive

to electrostatic discharge (ESD) and can be

damaged by static electricity. Proper ESD control

techniques should be used when handling these

devices.

4. Exceeding any one or combination of these limits may cause

permanent damage to this device.

5. M/A-COM does not recommend sustained operation near

these survivability limits.