LPC55S2X datasheet(71/140 Pages) NXP

71 / 140 page

LPC55S2x/LPC552x

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 2.2 — 8 December 2022

71 of 139

NXP Semiconductors

LPC55S2x/LPC552x

32-bit ARM Cortex-M33 microcontroller

7.28.6 Universally Unique Identifier (UUID)

Each LPC55S2x/LPC552x device consists of a unique 128-bit IETF RFC4122 compliant

non-sequential UUID. It can be read from the protected flash region (register location

0x0009_FC70 onwards).

7.29 Debug Mailbox and Authentication

The Debugger Mailbox (DM) AP offers a register based mailbox accessible by both CPUs

and the device debug port DP of the MCU. This port is always enabled and external world

can send and receive data to/from ROM. This port is used to implement NXP Debug

Authentication Protocol.

BootROM implements debug mailbox protocol to interact with tools over SWD interface.

LPC55S2x offers a debug authentication protocol as a tool to authenticate the

debugger and grant it access to the device. The debug authentication scheme on

LPC55S2x is a challenge-response scheme and assures that debugger in

possession of required debug credentials only can successfully authenticate over debug

interface and access restricted parts of the device. This protocol provides a mechanism

for a device and its debug interface to authenticate the identity and credentials of the

debugger (or user). Access right settings can be pre-configured and gets loaded into

is successfully completed, secure part of the device is non-accessible to the debugger.

7.30 Emulation and debugging

Debug and trace functions are integrated into the Arm Cortex-M33. Serial wire debug and

trace function (Serial Wire Output) are supported. Eight breakpoints and four watch points

are supported. In addition, JTAG boundary scan mode is provided.

The Arm SYSREQ reset is supported and causes the processor to reset the peripherals,

execute the boot code, restart from address 0x0000 0000, and break at the user entry

point.

The SWD pins are multiplexed with other digital I/O pins. On reset, the pins assume the

SWD functions by default.

LPC55S2X bảng dữ liệu(PDF) 71 Page - NXP Semiconductors