GPS Low Noise Amplifier

1.5 - 1.7 GHz

MAALSS0049

M/A-COM Inc. and its affiliates reserve the right to make changes to the

product(s) or information contained herein without notice. M/A-COM makes

no warranty, representation or guarantee regarding the suitability of its

products for any particular purpose, nor does M/A-COM assume any liability

whatsoever arising out of the use or application of any product(s) or

information.

• North America Tel: 800.366.2266 / Fax: 978.366.2266

• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300

• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298

Visit www.macom.com for additional data sheets and product information.

V1

2

RoHS

Compliant

Parameter

Test Conditions

Units

Min.

Typ.

Max.

Gain

1.575 GHz

dB

17

20

22

Noise Figure

1.575 GHz

dB

—

1.5

1.9

Input Return Loss

1.575 GHz

dB

—

15

—

Output Return Loss

1.575 GHz

dB

—

15

—

Output 1 dB Compression

1.575 GHz

dBm

—

8.5

—

Output IP3

-28 dBm Input Power, 1 MHz tone separation

1.575 GHz

dBm

12

17

—

Reverse Isolation

1.575 GHz

dB

—

34

—

Current

—

mA

—

9.5

16

Operating the MAALSS0049

To operate the device, follow these steps:

2. Set RF input.

3. Power down in reverse sequence.

Handling Procedures

Please observe the following precautions to avoid

damage:

Static Sensitivity

Gallium Arsenide Integrated Circuits are sensitive

to electrostatic discharge (ESD) and can be

damaged by static electricity. Proper ESD control

techniques should be used when handling these

devices.

†

Reference Application Note M538 for lead-free solder reflow

recommendations.