Electrical Products Division

6801 River Place Blvd.

Austin, TX 78726-9000

http://www.3M.com/elpd

Litho in USA.

© 3M 2002 78-8125-9669-6-A

IMPORTANT NOTICE

Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability

associated with such use.

Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture as of the date of

purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above,

your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except

where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect,

special, incidental or consequential regardless of the legal theory asserted.

Engineering Specification

Crimp-type terminals shall, electrically and mechanically,

connect permanently to the pre-stripped end of two

stranded copper wires.

The connector line shall offer barrel variations in wire

(AWG) size (22-18, 16-14, 12-10) and construction (non-

insulated brazed seam, vinyl insulated butted seam, nylon

insulated seamless, etc...). The connector line shall have

regulatory agency coverage (UL Listing, CSA

Certification). The connectors shall be marked with the

wire range and manufacturer’s symbol ( ).

The non-insulated, seamless butt connector shall be tin

plated, annealed copper, having a double-length, round

seamless barrel with a center stop, sized for a specified

(AWG) wire range (22-18, 16-14, 12-10).

3M and Scotchlok are trademarks of 3M.

is a trademark of Underwriters Laboratories.

is a trademark of Canadian Standards Association.