11

11 - 131

For price, delivery, and to place orders, please contact Hittite Microwave Corporation:

20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373

Order On-line at www.hittite.com

The circuit board used in the final application should

use RF circuit design techniques. Signal lines should

have 50 ohm impedance while the package ground

leads and backside ground paddle should be con-

nected directly to the ground plane similar to that

shown. A sufficient number of via holes should be

used to connect the top and bottom ground planes.

The evaluation circuit board shown is available from

Hittite upon request.

Evaluation PCB

Item

Description

J1 - J3

PCB Mount SMA RF Connector

J4, J5

2 mm DC Header

C1 - C2

100 pF Capacitor, 0402 Pkg.

C4 - C5

2.2 μF Tantalum Capacitor

U1

HMC511LP5 / HMC511LP5E VCO

110225 Eval Board

[1] Reference this number when ordering complete evaluation PCB

[2] Circuit Board Material: Rogers 4350

v00.0506

MMIC VCO w/ HALF FREQUENCY

OUTPUT 9.05 - 10.15 GHz