www.per kinelmer.com/opto

© 2001 PerkinElmer, Inc. All rights reserved.

.

USA:

PerkinElmer Optoelectronics

2175 Mission College Blvd.

Santa Clara, CA 95054

Phone: (408) 565-0850

Fax: (408) 565-0793

EUROPE:

PerkinElmer Optoelectronics GmbH

Wenzel-Jaksch-Str. 31

65199 Wiesbaden

Germany

Phone: +49 611 492 534

Fax: +49 611 492 578

ASIA:

PerkinElmer Optoelectronics

47 Ayer Rajah Crescent #06-12

Singapore 139947

Phone: +65 775 2022

Fax: +65 775 1008

DS-287 Rev A 1101

Dimensions (mm)

MD 900 Series

MD 1300 Series

MD 1900 Series

Red:

Vcc, input (+5 V to +5.5 V DC)

Black: GND

Coax:

External Gate in (TTL,active high)

Yellow: Monitor voltage output (|V

Green: Control voltage input via ext.

OpAmp (ref. to manual)

BNC Connector:

-

DC 0 - 10 V Signal Output

-

GND

Connections

·

CAUTION: HIGH VOLTAGE WARNING

This product operates at high voltage. Extreme care must be taken to ensure operator safety and to avoid damage to other

instruments. Avoid direct contact with the entrance window of the built in CPM when high voltage is applied. Avoid placing

conductive material close to the cathode.

Ensure that no light levels are applied, generating higher anode currents than specified.

All given values are nominal/typical @ 20 °C ambient temperature; specification subject to change without notice

CPM