ATGBICS® All rights reserved. EOE

Ref: ATGBICS_AFBR-79EQPZ-R1-C_V1

Page 1 of 15

Product Datasheet

AFBR-79EQPZ-R1-C

Avago Broadcom® Compatible 40Gb/s QSFP SR4 QSFP

Transceiver

Hot Pluggable, MTP/MPO Connector, +3.3V, MMF 150M DDM 0~70C

FEATURES

• 4 independent full-duplex channels

• Up to 11.2Gbps per channel bandwidth

• Aggregate bandwidth of > 40Gbps

• MTP/MPO optical connector

• QSFP MSA compliant

• Digital diagnostic capabilities

• CML compatible electrical I/O

• Single +3.3V power supply operating

• TX input and RX output CDR retiming

• Built-in digital diagnostic functions

• Temperature range 0°C to 70°C

• RoHS Compliant Part

APPLICATIONS

• Rack to rack

• Data Centre

• Metro networks

• Switches and Routers

• Infini band 4x SDR, DDR, QDR

DESCRIPTION

ATGBICS® AFBR-79EQPZ-R1-C is a parallel 40Gbps Quad Small Form-factor Pluggable (QSFP) optical

module that provides increased port density and total system cost savings. The QSFP full-duplex optical

module offers 4 independent transmit and receive channels, each capable of 10Gbps operation for an

aggregate bandwidth of 40Gbps 70m on OM3 Multimode Fiber (MMF)and 150m on OM4 MMF.

An optical fiber ribbon cable with an MPO/MTP connector at each end plugs into the QSFP module

receptacle. The orientation of the ribbon cable is “keyed” and guide pins are present inside the module’s

receptacle to ensure proper alignment. The cable usually has no twist (key up to key up) to ensure proper

channel to channel alignment. Electrical connection is achieved through a z-pluggable 38-pin IPASS®

connector.