belfuse.com/signal

128 Atlantic Avenue, Lynbrook, NY 11563

Toll Free 866-239-5777 | Tel 516-239-5777 | Fax 516-239-7208

sales@signaltransformer.com | techhelp@signaltransformer.com

Custom versions available upon request.

© 2022 Signal Transformer

Specifications subject to change without notice

SPDL Series II Aug-17-2022

SPDL Series II Datasheet

RoHS

Compliant

SPDL151306-1200-2P-T

• Test equipment

Z: measured on Agilent 4991A RF Impedance or equivalent

DCR: measured on Chroma 16502 micro micro-OHM meter or equivalent

Rated current: measured on Agilent 4284A LCR meter with 42841A Current Source or equivalent

• Notice

There could be measurement deviations with different instruments due to different test principles / internal resistance.

Open and Short compensation is performed before testing

RECOMMENDED REFLOW SOLDERING CONDITIONS (SMT-TYP)

0

60

120

180

240

300

T (S)

50

100

150

200

300

T (°C)

170±10°C, 60~120s

40

250+0/-5°C Peak

230°C

250

ADD:

The recommended reflow conditions as above graph, is set according to our soldering equipment, due to various

manufactures may have different reflow soldering equipment, products, process conditions, set methods, and so on.

When setting the reflow conditions, please adjust and confirm according to users’ environment/equipment.

Notice:

a) Solder reflow temperature: +250°C

°C Max. for 10 seconds max.

b) To solder inductors by soldering iron is not recommended.

c) Please contact us for details