www.nipponpulse.com

Stroke

Support Length (L2)

Max. Bending

All

5mm

0mm

Support and Bending

Wire Type

UL 1430

Wire AWG

28

U Phase

Red

V Phase

White

W Phase

Black

Lead Wire

300mm lead wire bare leads. The

bending radius of the motor cable

should be 10.72mm as suggested

by the wire manufacturer.

Label

Gap

Mounting Surface

Motor Cable

Length

Bending

Radius

dep

Total Length

Movable Range

Forcer Length

Forcer Screw Pitch

Stroke

Support Length

Yellow Mark

Reference End

Bore

Coil End

Receptacle Housing

XMR-03V

Plug Housing

XMP-03V

Retainer

XMS-03V

Pin Contact

SXM-001T-P0.6

Socket Contact

SXA-001T-P0.6

Connector (Motor Cable)

To be installed by the user.

Note: Cable length 300mm.

The bending radius of the motor cable should be 10.72 mm (wire diameter 1.34 * 8) as suggested by the wire manufacturer. This radius should be maintained.

Use supplied connector to attach the proper high-flex cable as required by your application.

L = See Shaft Length

L1 = Usable Stroke + A

L2 = See Support Length

A = See Forcer Length

P = See Forcer Screw Pitch

Tolerances are as follows:

Dimension (mm)

0 -

6

7 - 30

31 - 120

121 - 315

316 - 1000

1001 - 2000

2000 -

Tolerance (mm)

±0.1

±0.2

±0.3

±0.5

±0.8

±1.2

±1.5

Unless otherwise specified,

dimensions are in mm

For assistance in selecting the best motor for your application, contact Nippon Pulse

to speak with an applications engineer. 1-540-633-1677

Stroke

S040D

S040T

S040Q

S040X

20

55mm (2.2in)

64mm (2.5in)

73mm (2.9in)

109mm (4.3in)

30

65mm (2.6in)

74mm (2.9in)

83mm (3.3in)

119mm (4.7in)

40

75mm (3.0in)

84mm (3.3in)

93mm (3.7in)

129mm (5.1in)

Shaft Length (L)

Shaft Diameter - 4mm ±0.1

Additional stroke lengths are available (up to 250mm for S040D, and up to

200mm for S040T, S040Q, S040X). Contact Nippon Pulse for more information.

Stroke

S040D

S040T

S040Q

S040X

20

5.5g (0.19oz)

6.4g (0.23oz)

7.3g (0.26oz)

10.9g (0.38oz)

30

6.5g (0.23oz)

7.4g (0.26oz)

8.3g (0.29oz)

11.9g (0.42oz)

40

7.5g (0.26oz)

8.4g (0.3oz)

9.3g (0.33oz)

12.9g (0.46oz)

Shaft Mass

Spec

S040T

S040Q

Forcer Spacing Distance

2mm

Pole (N/S) Distance

9mm

Forcer Length

34mm

43mm

Flip Forcers

No

Yes

Forcer Spacing Distance

Tandem S040D forcers are

possible, but are equivalent

to one (1) S040Q forcer and

thus are not listed.

Forcer Spacing Distance

Tandem Forcer

Note: Metric units guaranteed. Imperial (United States customary)

units are calculated.

Thermal Specs

S040D

S040T

S040Q

S040X

Max Phase Temperature4

135°C (275°F)

Thermal Resistance (Coil) (K

q)

125.3°C/W

83.5°C/W

62.6°C/W

31.3°C/W

4

The standard temperature difference between the coil and the forcer surface is 10°C.