STNRGPF02 datasheet(32/43 Pages) STMICROELECTRONICS

32 / 43 page

Table 14. Analog comparator characteristics

Symbol

Parameter

Conditions

Min.(1)

Typ.

Max.(1)

Unit

VCPP01

Comparator CP0,1 positive input

voltage range

-40 ºC ≤ TA ≤ 105 ºC

1.23(2)

VCPP23

Comparator CP2,3 positive input

voltage range

-40 ºC ≤ TA ≤ 105 ºC

2(3)

VCPM23

Comparator CP2,3 negative

external input voltage range

-40 ºC ≤ TA ≤ 105 ºC

2(3)

CIN

Input capacitance

Voffset

Comparator offset error

tCOMP

Comparison delay time

50(4)

1. Data based on characterization results, not tested in production.

2. Maximum analog input voltage for comparators CP0 and CP1.

3. Maximum analog input voltage for comparators CP2 and CP3.

4. The overdrive voltage is ± 50 mV.

5.5

EMC characteristics

5.5.1

Electrostatic discharge (ESD)

Electrostatic discharges (3 positive then 3 negative pulses separated by 1 second) are applied to the pins of each

sample according to each pin combination. The sample size depends on the number of supply pins in the device

[3 parts * (n + 1) supply pin].

Table 15. ESD absolute maximum ratings (Data based on characterization results, not tested in

production).

Symbol

Ratings

Conditions

Maximum value

Unit

VESD(HBM)

Electrostatic discharge voltage

(human body model)

TA = 25 °C, conforming to

JEDEC/JESD22-A114E

2000

VESD(CDM)

Electrostatic discharge voltage

(charge device model)

TA = 25 °C, conforming to

ANSI/ESD STM 5.3.1 ESDA

500

VESD(MM)

Electrostatic discharge voltage

(machine model)

TA = 25 °C, conforming to

JEDEC/JESD-A115-A

200

5.5.2

Static latch-up

Two complementary static tests are required on 10 parts to assess the latch-up performance.

A supply overvoltage (applied to each power supply pin) and a current injection (applied to each input, output and

configurable I/O pin) are performed on each sample. This test conforms to the EIA/JESD78 IC latch-up standard.

Table 16. Electrical sensitivity

Symbol

Parameter

Conditions

Level

Static latch-up class

TA = 105 °C

STNRGPF02, STNRGPF12

EMC characteristics

DS12895 - Rev 2

page 32/43

STNRGPF02 bảng dữ liệu(PDF) 32 Page - STMicroelectronics

STNRGPF02 bảng dữ liệu(HTML) 32 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43

bảng dữ liệu tải về

Link URL