FME270-461SLASH883 datasheet(5/16 Pages) INTERPOINT

5 / 16 page

PIN OUT DOWN-LEADED MODEL

PIN OUT SIDE-LEADED MODELS

MODEL NUMBERING KEY

Angled corner and cover marking indicate pin one for cases U1, U2, and V.

Cover marking indicates pin one for cases W, Y and Z.

TOP VIEW

All FME models, FMD28-461SL,

and FMD270-461SL

(Pin side, marked side)

FME

28 - 461

/ 883

Base Model

Input Voltage

MIL-STD-461 Reference

Screening

Case/Lead Option*

(Standard screening has no designator

in this position.)

B3-11

FMD/FME EMI FILTER

0.7 TO 15 AMP

EMI INPUT FILTERS

Outline shown is case U2, pin out is the same for all

side-leaded cases. Also available: flanged – leads bent

down (case V); tabbed – leads bent up (case W), short

leads (case Y), and leads bent down (case Z). See

Section B8, cases U1, U2, V, W, Y, and Z for dimensions.

Pin1

Designation

1, 2, 3

Positive Input

4, 5, 6

Input Common

7, 8, 9

Output Common

10, 11, 12

Positive Output

—

Case Ground2

Notes

1. All pins must be connected.

2. The baseplate is the only case ground connection and

should directly contact chassis ground.

FMD28-461SL, FMD270-461SL,

FME28-461, and FME270-461

FIGURE 6: PIN OUT SIDE-LEADED MODELS

Squared corner and dot on top

of package indicate pin one.

BOTTOM VIEW

FMD28-461

FIGURE 7: PIN OUT FMD28-461

See Section B8, case J4, for dimensions.

Designation

Positive Input

Positive Output

Output Common

Case Ground1

Input Common

Note

1. Although

down-leaded

packages

can

connected to chassis ground with the case

ground lead, direct contact of the base plate to

chassis improves EMI performance.

DSCC NUMBERS

DSCC DRAWING

(5915)

95004-01HXC

95004-01HTC

95004-01HUC

95004-01HYC

95004-01HZC

95009-01HXC

IN PROCESS

FME SERIES

SIMILAR PART

FME28-461/883

FME28-461W/883

FME28-461V/883

FME28-461Y/883

FME28-461Z/883

FME270-461/883

FME270-461W/883

FME270-461V/883

FME270-461Y/883

FME270-461Z/883

FMD28-461

For exact specifications for a DSCC product, refer to the

DSCC drawing. Contact your Interpoint representative for

status on the FME DSCC releases. See Section A3,

“SMD/DSCC Lists”, for more information.

*Case/Lead Option: See section B8, cases J4, U1, U2, V, W, Y, and Z for

drawings and dimensions, see Section A5 for ordering information.

FME models: Case U2 has no designator in the case/lead option position.

To designate a case option add the case letter to the model number –

FME28-461V.

FMD models: Case J4 (down-leaded) has no designator in the case/lead-

option position. To designate case U1 (side-leaded) for the FMD place

"SL" in the case/lead option position – FMD28-461SL. The 270 volt FMD

is only available in the side-leaded case – FMD270-461SL.

FME270-461/883 bảng dữ liệu(PDF) 5 Page - Interpoint Corporation Company

FME270-461/883 bảng dữ liệu(HTML) 5 Page - Interpoint Corporation Company

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

bảng dữ liệu tải về

Link URL