B8-15

CASE G

Materials

Header Cold Rolled Steel/Nickel/Gold

Cover

MHF+ Series and FMH Filter

Kovar/Nickel

SMHF

Cold Rolled Steel/Nickel

Pins

#52 alloy (all cases)

compression glass seal

Case dimensions in inches (mm)

Tolerance

±0.005 (0.13) for three decimal places

±0.01 (0.2) for two decimal places

unless otherwise specified

CASE G

BOTTOM VIEW

Flanged package

See Figures 25 - 27

for pin configuration

2.005 max

(50.93)

1.130 max

(28.70)

Squared corner and dot on top

of case indicate pin one.

CAUTION

Heat from reflow or wave soldering may damage

the device. Solder pins individually with heat

application not exceeding 300

°C for 10 seconds

per pin.

Flange Thickness: 0.047 (1.19)

0.128 dia

(3.25)

0.030 dia.

(0.76)

Flanged cases: Designator "F" required in Case Option position of model number

MHF+ Series Single and Dual, LIM5050 Module: Screening – Standard, ES, or 883

SMHF Series, SLIM5050 Module: Screening – Space Standard, H, or K

BOTTOM VIEW CASE G1

0.000

0.160

(4.06)

0.960

(24.38)

1

2345

87

6

0.560

(14.22)

Squared corner and dot on top

of case indicate pin one.

Projection Weld

Seam Seal

Note: Although every effort has been made to render the case drawings at actual size, variations in the printing process may cause some distortion. Please refer

to the numerical dimensions for accuracy.