| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
AC244036 bảng dữ liệu(PDF) 5 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
AC244036 bảng dữ liệu(HTML) 5 Page - Microchip Technology |
|
5 / 78 page ![]() Debug Header Specification 2006-2012 Microchip Technology Inc. DS51292T-page 5 FIGURE 4: CONNECT HEADER TO DEBUG TOOL 4. Connect the header to the target board. On the bottom of the header is a socket that is used to connect to the target board. The header may be connected to the target board as follows: a) PDIP header socket to PDIP target socket with a stand-off (male-to-male) connector b) Header socket to plug on the target board c) Header socket to target socket with a transition socket (see the “Transition Socket Specification”, DS51194) An example connection is shown in Figure 5. The header socket will have the same pin count as your selected device. The ICE/ICD device on the top of the header usually has a larger pin count because it has additional pins that are dedicated to debug. FIGURE 5: CONNECT HEADER TO TARGET 5. If using a debug tool that can power the target, power that tool now. 6. Power the target, if needed. Debug Header (Top) ICE/ICD Device Debug Tool Module (Top) To PC and MPLAB® IDE Power In Target Board (Top) Target Socket Stand-off Connector Debug Header (Bottom) Header Socket |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |