9

Packaging and labeling

9.1

Product marking

A two line product marking is applied on the backside of the module (i.e. on the substrate). The first line is the

silicon product code, and the second line, the internal tracking code.

9.2

Inner box labeling

The labeling follows the ST standard packing acceptance specification.

The following information will be on the inner box label:

•

Assembly site

•

Sales type

•

Quantity

•

Trace code

•

Marking

•

Bulk ID number

9.3

Packing

At customer or subcontractor level, it is recommended to mount the VL53L4CX in a clean environment to avoid

foreign material deposition.

To help avoid any foreign material contamination at phone assembly level the modules is shipped in a tape and

reel format. The tape is described in Figure 25. Tape outline drawing.

The packaging is vacuum sealed and includes a desiccant.

The liner is compliant with reflow at 260°C. It must be removed during assembly of the customer device, just

before mounting the cover glass.

VL53L4CX

Packaging and labeling

DS13805 - Rev 3

page 28/38