GSIB660 datasheet(17/70 Pages) TOSHIBA

tên linh kiện	GSIB660

Giải thích chi tiết về linh kiện	COLOUR TELEVISION

PDF	70 Pages

Scroll/Zoom	100%

nhà sản xuất	TOSHIBA [Toshiba Semiconductor]

Trang chủ	http://www.semicon.toshiba.co.jp/eng

Logo

17 / 70 page

Alignment and Adjustments

4-6

4-7 Factory Adjustment

1. To enter the “Service Mode”, Press the remote-control keys in this sequence :

- If you do not have Factory remote-control

- If you have Factory remote-control

2. After the Service Mode is entered, the initial screen is as shown in the figure below.

Service

Deflection

Video Adjust 1

Video Adjust 2

Video Adjust 3

Option(81h 0Ch)

Reset

G2-Adjust

Others

3. Use the Channel Up/Down buttons to move the cursor in the adjustment parameters.

- When CRT, CRT PCB, FBT, E

PROM (sometimes MICOM) is replaced, the adjustment values

should be controlled.

- After the Service adjustment is completed, Do not select “Reset” in the service mode menu.

(After above procedure is done, power is on initially and the “Plug and Play” will be operated.)

PICTURE OFF

PICTURE ON

DISPLAY ()

MUTE

PICTURE ON

DISPLAY ()

FACTORY

4-7-1 Service Mode

* These hexa digits are check sum value which

depends on the MICOM.

If check sum value is changed, the value of

2PROM Data newly initialed.

Note 2.

GSIB660 bảng dữ liệu(PDF) 17 Page - Toshiba Semiconductor