Rev Date: 7/29/2022

5

www.seielect.com

This specification may be changed at any time without prior notice

marketing@seielect.com

Please confirm technical specifications before you order and/or use.

MLFA Series

Metal Film Melf Resistor

– AEC-Q200 Qualified

Stackpole Electronics, Inc.

Resistive Product Solutions

Soldering Condition:

(1) Time of IR reflow soldering at maximum temperature point 260°C: 10 seconds

(2) Time of wave soldering at maximum temperature point 260°C: 10 seconds

(3) Time of soldering iron at maximum temperature point 410°C: 5 seconds

Pulse Withstanding Capacity

The single impulse graph is the result of the impulse of rectangular shape applied. The limit of acceptance was a shift

in resistance of less than 1% from the initial value. The power applied was subject to the restrictions of the maximum

permissible impulse voltage graph shown.