FEATURES

optimize board

Low profile package

Built-in strain relief

Glass passivated junction

Low inductance

Excellent clamping capability

Repetition Rate(duty cycle):0.05%

Volts to BV min.

Typical IR less than 1mA above 10V

Dimensions in inches and (millimeters)

MECHANICAL DATA

Standard Packaging: 16mm tape(EIA STD RS-481)

Weight: 0.007ounce, 0.21gram

SYMBOL VALUE

UNITS

Minimum

1500

Watts

SEE

TABLE 1

Amps

-55 to +

150

Notes :

per Fig. 2 .

2.Mounted on 8.0mm

3.8.3ms single half sine-wave , or equivalent square wave, Duty cycle = 4 pulses per minutes maximum.

1.5SMC SERIES

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

VOLTAGE-6.8 TO 91 Volts

1500 Watt Peak Pulse Power

Peak Pulse Power Dissipation on 10/1000

s waveform (Note 1,FIG.1)

For surface mounted applications in order to

Fast response time: typically less than 1.0ps from 0

Case: JEDEC DO214AB. Molded plastic over glass passivated junction

Terminal: Solder plated, solderable per MIL-STD-750, Method 2026

High temperature soldering: 250°C/10 seconds at terminals

Polarity: Color band denotes positive end (cathode) except Bidirectional

DEVICES FOR BIPOLAR APPLICATION

For Bidirectional use Suffix CA for types 1.5SMC6.8CA thru types 1.5SMC91CA

Electrical characteristics apply in both directions

Operating junction and Storage Temperature Range

MAXIMUM RATINGS AND CHARACTERISTICS

Ratings at 25

ambient temperature unless otherwise specified.

200

Amps

RATING

Peak Pulse Current of on 10/1000

s waveform (Note 1,FIG.3)

Peak Forward Surge Current,8.3ms Single Half Sine-Wave

Superimposed on Rated Load,(JEDEC Method) (Note 3)

DB LECTRO Inc.

DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714