| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
TMC2084-HT bảng dữ liệu(PDF) 9 Page - SMSC Corporation |
|
|
|||||||||||||||||||||||||||||
TMC2084-HT bảng dữ liệu(HTML) 9 Page - SMSC Corporation |
|
9 / 74 page ![]() Standalone Mode CircLink TM Controller Datasheet SMSC TMC2084 Page 9 Revision 0.1 (03-31-06) DATASHEET PIN NO. SIGNAL NAME PIN NAME BUFFER TYPE BY FUNCTION DETAILED DESCRIPTION General Purpose I/O Group D 30 Port D bit 0 External Trigger Input 2 (Node ID Configuration Bit 0) PD0 nPISTR2 (NID0) IT/O42 IT (IT) The bit 0 of Port D. A bi-directional port. The port direction can be specified using the shared pin PGS1. PGS1 = L specifies input; PGS1 = H specifies output. External Trigger Input 2 The input port of external trigger signal. If the shared pins PGS0 and PGS1 are set to L and H respectively while either "6h" or "7h" is set using TXTRG3 – 0 bits that are configured through network, then this port is configured for the external trigger input port. The configuration bit 0 of the own node ID. For detailed information, see the section on Configuration Using Shared Pins. 31 Port D bit 1 (Node ID Configuration Bit 1) PD1 (NID1) IT/O42 (IT) The bit 1 of Port D. A bi-directional port. The port direction is configured using the same way as PD0. The configuration bit 1 of the own node ID For detailed information, see the section on Configuration Using Shared Pins. 32 Port D bit 2 (Node ID Configuration Bit 2) PD2 (NID2) IT/O42 (IT) The bit 2 of Port D. A bi-directional port. The port direction is configured using the same way as PD0. The configuration bit 2 of the own node ID For detailed information, see the section on Configuration Using Shared Pins. 33 Port D bit 3 (Node ID Configuration Bit 3) PD3 (NID3) IT/O42 (IT) The bit 3 of Port D. A bi-directional port. The port direction is configured using the same way as PD0. The configuration bit 3 of the own node ID For detailed information, see the section on Configuration Using Shared Pins. 34 Port D bit 4 FLAG OUTPUT bit0 (Page Size Selection) PD4 FO0 (PSSL) IT/O42 O42 (IT) The bit 4 of Port D. A bi-directional port. The port direction can be specified using the shared pin PGS1. PGS1 = L specifies input; PGS1 = H specifies output. PGS2 should be set to L. The bit0 of FLAG OUTPUT. A bi-directional port. Setting the shared pin PGS2 to H configures FLAG OUTPUT mode. For detailed information of the flag, see the section on Configuration Through Network. Page Size Selection. For detailed information, see the section on Configuration Using Shared Pins. |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |