| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
562R5GAS10 bảng dữ liệu(PDF) 3 Page - Vishay Siliconix |
|
|
|||||||||||||||||||||||||||||
562R5GAS10 bảng dữ liệu(HTML) 3 Page - Vishay Siliconix |
|
3 / 5 page ![]() 561R, 562R, 565R Series www.vishay.com Vishay Cera-Mite Revision: 23-Jul-2021 3 Document Number: 23110 For technical questions, contact: ceramitesupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TAPE AND REEL OPTIONS • Tape and reel available on diameter sizes 0.250" to 0.680" • Part number codes and specifications for tape and reel packaging are found in the general information document www.vishay.com/doc?23140 CAPACITANCE CHANGE VS. TEMPERATURE (Typical) STORAGE The capacitors must not be stored in a corrosive atmosphere, where sulphide or chloride gas, acid, alkali or salt are present. Exposure of the components to moisture, should be avoided. The solderability of the leads is not affected by storage of up to 24 months (temperature +10 °C to +40 °C, relative humidity up to 60 % RH). Class 2 ceramic dielectric capacitors are also subject to aging see general information (www.vishay.com/doc?23140). SOLDERING SOLDERING RECOMMENDATIONS Ceramic capacitors are very sensitive to rapid changes in temperature (thermal shock) therefore the solder heat resistance specification (see table above) should not be exceeded. Exposing the capacitor to excessive heating may result in thermal shocks that can crack the ceramic body. Similarly, excessive heating can cause the internal solder junction to melt. When soldering radial leaded ceramic capacitors with a soldering iron, it should be performed under the following conditions and should not exceed: • Maximum temperature of iron-tip: 400 °C • Maximum soldering iron wattage: 50 W • Maximum soldering time: 3.5 s Failure to follow the above cautions may result, in worst case, in short circuit or cause fuming or thermo-mechanical damage when the product is used. Leaded ceramic capacitors are not designed for reflow process or dipping the body into a solder melt. 10 100 1000 10000 -10 -5 0 5 10 -55 -35 -15 5 25 45 65 85 105 125 Axis Title Temperature (°C) N750 NP0 Temperature dependence of the capacitance 10 100 1000 10000 -100 -80 -60 -40 -20 0 20 40 60 -55 -35 -15 5 25 45 65 85 105 125 Axis Title Temperature (°C) Temperature dependence of the capacitance ▬▬▬ X5F ▬▬▬ X7R ▬▬▬ Y5U ▬▬▬ Z5U SOLDERING SPECIFICATIONS Soldering test for capacitors with wire leads: (according to IEC 60068-2-20, solder bath method) SOLDERABILITY RESISTANCE TO SOLDERING HEAT Soldering temperature (235 ± 5) °C (260 ± 5) °C Soldering duration (2 ± 0.5) s (10 ± 1) s Distance from component body 2 mm 5 mm |
|
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |