User Manual

17 of 33

Revision 1.6

2018-11-27

EVAL-M1-101T User Manual

iMOTION™ Modular Application Design Kit

Getting Started with EVAL-M1-101T

Note:

On-board Debugger portion of EVAL-M1-101T is galvanically isolated from the controller portion

and the attached power board. In order to program the parameters or firmware to the IMC101T-

T038 controller, the 3.3V DC voltage needs to be supplied to the controller portion of the EVAL-M1-

101T. This voltage can either be supplied by the power board (MADK power boards are designed to

supply the 3.3V to the control board through M1 or M3 connector) or by feeding the 3.3V DC voltage

to the control board through some of the available 3.3V access/test points if the power board is not

attached to the EVAL-M1-101T control board.