AC TO DC EXTERNAL WALLMOUNT ADAPTOR 2-BLADE USA OR

EURO-STECKER AC PLUG SINGLE OUTPUT 9-10 WATTS

SWITCHING POWER SUPPLIES

TPES09 SERIES

FEATURES:

VERY SMALL & COMPACT IN SIZE

2-BLADE USA OR EURO-STECKER AC PLUG

EMI MEET EN55022 / FCC CLASS B

MEET UNIVERSAL SAFETY STANDARDS

CE MARKING COMPLIANCE

GENERAL SPECIFICATION

Efficiency: 75% typical.

Switching Frequency: Fixed 100K Hz.

Circuit Topology: Fixed Frequency flyback circuit.

Transient Response: Output voltage returns in less than

3mS following a 25% load change.

Safety Standard: UL1950 / EN60950 Class II.

Power Density: 1.73 Watts / Cubic Inch.

Operating Temperature: 0 to +40°C.

Storage Temperature: -20 to +85°C.

Temperature Coefficient: 0.04%/°C.

Cooling: Free air convection.

Construction: Impact resistant thermo-plastic

enclosure case.

Wallmount Format.

Notes: (1) All measurements are at nominal input, full load, and +25°C unless otherwise specified.

(2) Load regulation is measured at 115Vac or 230Vac in percentage to indicate the change in output voltage as the load is varied from half load to full load (

±%).

(3) The exact obtainable load regulation depends upon the output cord selected and load current. Upper data are for 6 ft. (2 m) cord AWG#18 wires.

OUTPUT SPECIFICATION

Output Voltage: See Ratings Chart.

Output Current: See Ratings Chart.

Output Wattage: 9 ~ 10 Watts typical.

Output Connector: Optional.

Line Regulation: 0.1% typical.

Load Regulation: ±1.5 ~3.0% typical.

Noise & Ripple: Typ. 1.0% peak to peak.

OVP: Built-in, Zener Diode clamping.

Overload Protection: Typ. 125 ~ 150% of max. power

overrange or short circuit, power foldback

& self-recovering.

SPECIFICATION

INPUT SPECIFICATION

Input Voltage: 90-132Vac or 90-264Vac.

Input Connector: 2-blade USA WM1 or

Euro-Stecker WM3 AC plug.

Input Frequency: 47-63Hz.

Inrush Current: Typical 34A @230Vac.

21A @ 230 Vac by adding the thermister.

Input Current: 0.22A@115Vac. / 0.1A @ 230Vac.

Dielectric Withstand: Meet IEC950.

EMI: Meet EN55022 / FCC Class B.

Hold-up Time: 10mS @115Vac or

40mS @230Vac typical.

For the details of safety approval, please consult the factory.

TOTAL POWER INT'L

TOTAL POWER INT'L Tel: 877-646-0900 Fax: 978-453-7395

Email: sales@total-power.com http://www.total-power.com

-1-