| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
R01DS0375EU0110 bảng dữ liệu(PDF) 21 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
R01DS0375EU0110 bảng dữ liệu(HTML) 21 Page - Renesas Technology Corp |
|
21 / 70 page ![]() R01DS0375EU0110 Rev.1.10 Page 21 of 70 Feb 24, 2022 RA6T1 Datasheet 2. Electrical Characteristics Caution: To protect the reliability of the MCU, the output current values should not exceed the values in this table. The average output current indicates the average value of current measured during 100 μs. Note 1. This is the value when low driving ability is selected in the Port Drive Capability bit in the PmnPFS register. The selected driving ability is retained in Deep Software Standby mode. Note 2. This is the value when middle driving ability is selected in the Port Drive Capability bit in the PmnPFS register. The selected driving ability is retained in Deep Software Standby mode. Note 3. This is the value when high driving ability is selected in the Port Drive Capability bit in the PmnPFS register. The selected driving ability is retained in Deep Software Standby mode. Note 4. Except for P000 to P007, P200, which are input ports. 2.2.4 I/O VOH, VOL, and Other Characteristics Permissible output current (max value per pin) Ports P008, P201 - IOH ---4.0 mA IOL --4.0 mA Ports P014, P015 - IOH ---8.0 mA IOL --8.0 mA Ports P205, P206, P407 to P415, P602, P708 (total 13 pins) Low drive*1 IOH ---4.0 mA IOL --4.0 mA Middle drive*2 IOH ---8.0 mA IOL --8.0 mA High drive*3 IOH ---40 mA IOL --40 mA Other output pins*4 Low drive*1 IOH ---4.0 mA IOL --4.0 mA Middle drive*2 IOH ---8.0 mA IOL --8.0 mA High drive*3 IOH ---32 mA IOL --32 mA Permissible output current (max value of total of all pins) Maximum of all output pins ΣIOH (max) ---80 mA ΣIOL (max) --80 mA Table 2.6 I/O VOH, VOL, and other characteristics (1 of 2) Parameter Symbol Min Typ Max Unit Test conditions Output voltage IIC VOL -- 0.4 V IOL = 3.0 mA VOL -- 0.6 IOL = 6.0 mA IIC *1 VOL -- 0.4 IOL = 15.0 mA (ICFER.FMPE = 1) VOL -0.4 - IOL = 20.0 mA (ICFER.FMPE = 1) Ports P205, P206, P407 to P415, P602, P708 (total of 13 pins)*2 VOH VCC - 1.0 - - IOH = -20 mA VCC = 3.3 V VOL -- 1.0 IOL = 20 mA VCC = 3.3 V Other output pins VOH VCC - 0.5 - - IOH = -1.0 mA VOL -- 0.5 IOL = 1.0 mA Input leakage current RES |Iin|- - 5.0 μAVin = 0 V Vin = 5.5 V Ports P000 to P002, P004 to P006, P200 -- 1.0 Vin = 0 V Vin = VCC Ports P003, P007 Before initialization*3 -- 45.0 Vin = 0 V Vin = VCC After initialization*4 -- 1.0 Vin = 0 V Vin = VCC Table 2.5 I/O IOH, IOL (2 of 2) Parameter Symbol Min Typ Max Unit |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |