 |
công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
|
công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
IPS1025H bảng dữ liệu(PDF) 1 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
IPS1025H bảng dữ liệu(HTML) 1 Page - STMicroelectronics |
|
|
1 / 32 page  Features • 8 V to 60 V operating supply voltage range • Operating output current: 2.4 A (IPS1025H/HQ) or 5.6 A (IPS1025H-32/HQ-32) • Smart driving of capacitive load • Fast demagnetization of inductive loads • Under-voltage lock-out • VCC over-voltage protection • Output overload and over-temperature protections • Case over-temperature protection • Ground disconnection protection • Overload event diagnostic pin • Over-temperature event diagnostic pin • Designed to meet IEC 61000-4-2, IEC 61000-4-4, IEC 61000-4-5 • Packages: PowerSSO-24 and QFN48L 8x6x0.9 mm Applications • Programmable logic control • Vending machines • Industrial PC peripheral input/output • Numerical control machines • General high-side switch applications Description The IPS1025H/HQ and IPS1025H-32/HQ-32 are single high-side switch ICs able to drive capacitive, resistive or inductive loads with one side connected to ground. The very low RDS-ON (≤ 25 mΩ up to TJ = 125 °C) makes the IC suitable for the applications with up to 2.4 A (IPS1025H/HQ) or 5.6 A (IPS1025H-32/HQ-32) steady state operating current. The output channel is protected against junction over-temperature events by a junction temperature sensor, and a further temperature sensor is included to monitor case temperature, so the overheated output channel can only be turned back ON when the case temperature returns below the reset temperature. The embedded overload protection circuit monitors the output current and, on triggering of the activation threshold (IPK), starts modulating the impedance of the output switch to limit the output current to ILIM, for both IC and load protection. The IC offers two different sets of activation threshold and limitation levels (IPKH, ILIMH and IPKL, ILIML) for smart driving of capacitive loads (such as bulb lamps) and loads with initial peak current requirements. The IC diagnostics is based on FLT1 and FLT2 pins (both current source); activated by respective overload or overtemperature events on the output channel. Product status link IPS1025H IPS1025H-32 IPS1025HQ IPS1025HQ-32 Product label High efficiency, high-side switch with extended diagnostics and smart driving for capacitive loads IPS1025H, IPS1025H-32 IPS1025HQ, IPS1025HQ-32 DS13780 - Rev 3 - August 2022 For further information contact your local STMicroelectronics sales office. www.st.com |
Số phần tương tự - IPS1025H |
|
Mô tả tương tự - IPS1025H |
|
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Vietnamese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
