Notices / Items to be observed

■ Applicable laws and regulations

・This product complies with the RoHS Directive (Restriction of the use of certain hazardous substances in electrical and

electronic equipment (DIRECTIVE 2011/65/EU and

（EU)2015/863)).

・ No Ozone Depleting Chemicals(ODC's), controlled under the Montreal Protocol Agreement, are used in producing

this product. We do not use PBBs or PBDEs as brominated flame retardants.

・ Export procedure which followed export related regulations, such as foreign exchange and a foreign trade method,

on the occasion of export of this product.

・ These products are not dangerous goods on the transportation as identified by UN(United Nations) numbers or UN

classification.

■ Limited applications

・ This capacitor is designed to be used for electronics circuits such as audio/visual equipment, home appliances,

computers and other office equipment, optical equipment, measuring equipment.

・ An advanced specification must be signed individually for high-reliability use that might threaten human life or

property due to a malfunction of the capacitor.

■ Intellectual property rights and licenses

・ The technical information in this specification provides examples of our products' typical operations and application

circuits. We do not guarantee the non-infringement of third party's intellectual property rights and we do not grant

any license, right, or interest in our intellectual property.

■ For specification

・ This specification guarantees the quality and performance of the product as individual components.

The durability differs depending on the environment and the conditions of usage.

Before use, check and evaluate their compatibility with actual conditions when installed in the products.

When safety requirements cannot be satisfied in your technical examination, inform us immediately.

・ Do not use the products beyond the specifications described in this document.

■ Upon application to products where safety is regarded as important

Install the following systems for a fail-safe design to ensure safety if these products are to be used in equipment where

a defect in these products may cause the loss of human life or other signification damage, such as damage to vehicles

(automobile, train, vessel), traffic lights, medical equipment, aerospace equipment, electric heating appliances,

combustion/ gas equipment, rotating rotating equipment, and disaster/crime prevention equipment.

(1) The system is equipped with a protection circuit and protection device.

(2) The system is equipped with a redundant circuit or other system to prevent an unsafe status in the event

of a single fault.

■ Conditions of use

・ Before using the products, carefully check the effects on their quality and performance, and determined whether or not they

　can be used. These products are designed and manufactured for general-purpose and standard use in general electronic

equipment. These products are not intended for use in the following special conditions.

(1) In liquid, such as Water, Oil, Chemicals, or Organic solvent.

(2) In direct sunlight, outdoors, or in dust.

(3) In vapor, such as dew condensation water of resistive element, or water leakage, salty air, or air with a high

(4) In an environment where strong static electricity or electromagnetic waves exist.

(5) Mounting or placing heat-generating components or inflammables, such as vinyl-coated wires, near these products.

(6) Sealing or coating of these products or a printed circuit board on which these products are mounted, with resin and

other material.

(7) Using resolvent, water or water-soluble cleaner for flux cleaning agent after soldering. (In particular, when using water or

a water-soluble cleaning agent, be careful not to leave water residues)

(8) Using in the atmosphere where strays acid or alkaline.

(9) Using in the atmosphere where there are excessive vibration and shock.

(10) Using in the atmosphere where there are low pressure or decompression.

・ Please arrange circuit design for preventing impulse or transitional voltage.

　Do not apply voltage, which exceeds the full rated voltage when the capacitors receive impulse voltage, instantaneous high

　voltage, high pulse voltage etc.

・ Our products there is a product are using an electrolyte solution. Therefore, misuse can result in rapid deterioration of

characteristics and functions of each product. Electrolyte leakage damages printed circuit and affects performance,

characteristics, and functions of customer system.

Notices

Items to be observed

16-Apr-21