AS5043 Programmable 360° Magnetic Angle Encoder

Revision 1.4, 04-Apr-06

www.austriamicrosystems.com

Page 26 of 26

22 Recommended PCB Footprint:

Recommended Footprint Data

mm

inch

A

9.02

0.355

B

6.16

0.242

C

0.46

0.018

D

0.65

0.025

E

5.01

0.197

23 Revision History

Revision

Date

Description

1.4

Apr. 04, 2006

Update Programming Sequence Figure 11; Update Prog. Conditions 19.7

Include new OTP feature: permanent enabling of analog output (see 11.1.2).

1.3

Sep. 27, 2005

Update added features for Date Codes A534xx and higher:

Clamping levels: 10%/90% VDD, default OPAMP gain = external, red/yellow/green Magnetic field

indicator, exit alignment mode by s/w, falling edge on analog response curve on 45° and 90° modes,

jitter-free transition 360°/0° in analog mode.

Update propagation delay and thermal resistance of IC package

1.2

April 11, 2005

Add description for Analog modes and Programming

1.1

Feb. 18.2005

Update pin assignment and operating modes

1.0

Dec. 7, 2004

initial revision

24 Contact

24.1 Headquarters

austriamicrosystems AG

A 8141 Schloss Premstätten, Austria

Phone: +43 3136 500 0

Fax:

+43 3136 525 01

industry.medical@austriamicrosystems.com

www.austriamicrosystems.com

25 Copyright

Devices sold by austriamicrosystems are covered by the warranty and patent indemnification provisions appearing in its Term of

Sale. austriamicrosystems makes no warranty, express, statutory, implied, or by description regarding the information set forth

herein or regarding the freedom of the described devices from patent infringement. austriamicrosystems reserves the right to

change specifications and prices at any time and without notice. Therefore, prior to designing this product into a system, it is

necessary to check with austriamicrosystems for current information. This product is intended for use in normal commercial

applications.

Copyright © 2006 austriamicrosystems. Trademarks registered ®. All rights reserved. The material herein may not be

reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. To the best of

its knowledge, austriamicrosystems asserts that the information contained in this publication is accurate and correct. However,

austriamicrosystems shall not be liable to recipient or any third party for any damages, including but not limited to personal

injury, property damage, loss of profits, loss of use, interruption of business or indirect, special, incidental or consequential

damages, of any kind, in connection with or arising out of the furnishing, performance or use of the technical data herein. No

obligation or liability to recipient or any third party shall arise or flow out of austriamicrosystems rendering of technical or other

services.