Data Sheet

ADM3050E

Rev. B | Page 7 of 19

UL (Pending)

CSA (Pending)

VDE (Pending)

CQC (Pending)

Basic insulation at: 300 V rms mains, 780 V

Reinforced insulation at: 300 V rms mains, 390

File E214100

File 205078

File 2471900-4880-0001

File (pending)

1

In accordance with UL 1577, each ADM3050E is proof tested by applying an insulation test voltage ≥ 6840 V rms for 1 sec.

2

The * marking branded on the component designates DIN V VDE V 0884-10 approval.

ADM3050EBRIZ

See Table 11 and the Insulation Lifetime section for the recommended maximum working voltages for specific cross isolation waveforms

and insulation levels. The ADM3050EBRIZ is pending approval or approved by the organizations listed in Table 6.

Table 6.

UL (Pending)

CSA (Pending)

VDE (Pending)

CQC (Pending)

UL1577 Component

Approved under CSA Component

Acceptance Notice 5A

DIN V VDE V 0884-10

Certified under CQC11-

471543-2012

Single Protection, 5700 V rms

Isolation Voltage

CSA 60950-1-07+A1+A2 and

IEC 60950-1, second edition, +A1+A2:

Reinforced insulation,

GB4943.1-2011

Basic insulation at 780 V rms

Reinforced insulation at

IEC 60601-1 Edition 3.1:

Basic insulation (1 MOPP), 490 V rms

Reinforced insulation (2 MOPP), 238 V rms

CSA 61010-1-12 and IEC 61010-1 third edition:

Basic insulation at: 300 V rms mains, 780 V

Reinforced insulation at: 300 V rms mains,

File E214100

File 205078

File 2471900-4880-0001

File (pending)

1

In accordance with UL 1577, each ADM3050E is proof tested by applying an insulation test voltage ≥ 6840 V rms for 1 sec.

2

The * marking branded on the component designates DIN V VDE V 0884-10 approval.

DIN V VDE V 0884-10 (VDE V 0884-10) INSULATION CHARACTERISTICS (PENDING)

These isolators are suitable for reinforced electrical isolation only within the safety limit data. Protective circuits ensure the maintenance

of the safety data.

Table 7. ADM3050EBRWZ VDE Characteristics

Description

Test Conditions/Comments

Symbol

Characteristic

Unit

Installation Classification per DIN VDE 0110

For Rated Mains Voltage ≤ 150 V rms

I to IV

For Rated Mains Voltage ≤ 300 V rms

I to IV

For Rated Mains Voltage ≤ 600 V rms

I to IV

Climatic Classification

40/125/21

Pollution Degree per DIN VDE 0110, Table 1

2

Maximum Working Insulation Voltage

Reinforced

849