ADRF5474BCZ datasheet(5/14 Pages) AD

5 / 14 page

Data Sheet

ADRF5474

ABSOLUTE MAXIMUM RATINGS

analog.com

Rev. 0 | 5 of 14

Table 3.

Parameter

Rating

Positive Supply Voltage

−0.3 V to +3.6 V

Negative Supply Voltage

−3.6 V to +0.3 V

Digital Control Inputs

Voltage

−0.3 V to VDD + 0.3 V

Current

3 mA

RF Power1 (Frequency = 100 MHz to 50 GHz,

TDIE = 85°C2)

Input at ATTIN

Steady State, Average

24 dBm

Steady State, Peak

25 dBm

Hot Switching, Average

24 dBm

Hot Switching, Peak

25 dBm

Input at ATTOUT

Steady State, Average

16 dBm

Steady State, Peak

17 dBm

Hot Switching, Average

16 dBm

Hot Switching, Peak

17 dBm

RF Power Under Unbiased Condition (VDD and

VSS = 0 V)

Input at ATTIN

17 dBm

Input at ATTOUT

9 dBm

Temperature

Junction (TJ)

135°C

Storage

−55°C to +150°C

Processing

170°C

Continuous Power Dissipation (PDISS)

0.20 W

1 For power derating over frequency, see Figure 2 and Figure 3. Applicable for

all ATTIN and ATTOUT power specifications.

2 For 105°C operation, the power handling degrades from the TDIE = 85°C

specifications by 3 dB.

Stresses at or above those listed under absolute maximum ratings

may cause permanent damage to the product. This is a stress

rating only; functional operation of the product at these or any other

conditions above those indicated in the operational section of this

specification is not implied. Operation beyond the maximum operat-

ing conditions for extended periods may affect product reliability.

THERMAL RESISTANCE

Thermal performance is directly linked to printed circuit board

(PCB) design and operating environment. Careful attention to PCB

thermal design is required.

θJC is the junction to case bottom (channel to carrier bottom)

thermal resistance.

Table 4. Thermal Resistance

Package Type

θJC

Unit

C-16-5

250

°C/W

POWER DERATING CURVES

Figure 2. Power Derating vs. Frequency, Low Frequency Detail, TDIE = 85°C

Figure 3. Power Derating vs. Frequency, High Frequency Detail, TDIE = 85°C

ELECTROSTATIC DISCHARGE (ESD) RATINGS

The following ESD information is provided for handling of ESD-sen-

sitive devices in an ESD protected area only.

Human body model (HBM) per ANSI/ESDA/JEDEC JS-001.

ADRF5474BCZ bảng dữ liệu(PDF) 5 Page - Analog Devices

ADRF5474BCZ bảng dữ liệu(HTML) 5 Page - Analog Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14

bảng dữ liệu tải về

Link URL