USB5742 datasheet(44/48 Pages) MICROCHIP

44 / 48 page

USB5742

DS00002016G-page 44

 2022 Microchip Technology Inc. and its subsidiaries

APPENDIX A: DATA SHEET REVISION HISTORY

TABLE A-1:

REVISION HISTORY

Revision Level & Date

Section/Figure/Entry

Correction

DS00002016G (03-09-22)

Table 3-1

Updated pin reset states.

DS00002016F (07-21-20)

“USB 3.1” changed to “USB 3.2” throughout document.

Table 3-2, "Pin Reset State Legend"

Table added.

Pin Descriptions on page 10

“Reset State” column added to Pin Assign-

ment table.

Notes added to tables explaining what to do

with certain pins when unused.

Section 10.2, "Operating Condi-

tions**"

Supply Voltage Rise Time increased to 5ms.

Section FIGURE 10-1:, "Supply Rise

Time Model"

Note added following diagram.

DS00002016E (11-11-19)

Product Identification System on page

Added additional “SEU” ordering code option.

DS00002016D (07-20-18)

FIGURE 10-2: on page 35 and

Table 10-5, "Power Supply and

RESET_N Sequence Timing"

Rise time modified: “VDD33 to VDD12”

changed to “VDD12” to VDD33”.

Section 9.0, "Compliance Update"

TID number added to first paragraph.

DS00002016C (06-12-18)

Cover

Added new Highlight bullet/sub-bullets regard-

ing USB-IF ECN support: “USB-IF certified

(TID 330000076), supporting latest Engineer-

ing Change Notices for compliance with USB-

IF logo testing for new USB Type-CTM

industry initiative”.

Section 1.2, "Reference Documents"

Updated USB specification reference.

Section 9.0, "Compliance Update"

Added new Compliance Update section.

FIGURE 10-2: on page 35 and

Table 10-5, "Power Supply and

RESET_N Sequence Timing"

Rise time modified: “VDD12 to VDD33”

changed to “VDD33” to VDD12”.

DS00002016B (06-06-16)

Section 11.0, Package Information

Added top marking information and land pat-

tern drawing.

Product Identification System on page

Added package with hub feature controller

disabled

Cover, Product Identification System

Added industrial temperature option.

All

Updated “SQFN” references to “VQFN”.

Name change only.

Section 8.4.2.1, Port Power Control

using USB Power Switch

Added additional information on overcurrent

detection methods.

Section 10.6.1, Power Supply and

RESET_N Sequence Timing

Added Power Supply and RESET_N

Sequence Timing section.

Section 10.6.5, I2C Timing

“100kHz Standard Mode (Sm)” updated to

“400kHz Fast Mode (Fm)”, since the device

supports up to 400kHz I2C operation.

DS00002016A (09-10-15)

All

Initial Release

USB5742 bảng dữ liệu(PDF) 44 Page - Microchip Technology

USB5742 bảng dữ liệu(HTML) 44 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48

bảng dữ liệu tải về

Link URL