MIC5396 datasheet(3/26 Pages) MICROCHIP

3 / 26 page



2019-2022 Microchip Technology Inc. and its subsidiaries

DS20006264C-page 3

MIC5396/7/8/9

1.0

ELECTRICAL CHARACTERISTICS

Absolute Maximum Ratings(†)

Supply Voltage (VIN1, VIN2).......................................................................................................................... –0.3V to +6V

Enable Voltage (VEN1, VEN2) .........................................................................................................................–0.3V to VIN

Power Dissipation (PD) Note 1...............................................................................................................Internally Limited

ESD Rating Note 2..................................................................................................................................................... 3 kV

Operating Ratings(‡)

Supply Voltage (VIN1, VIN2)....................................................................................................................... +2.5V to +5.5V

Enable Voltage (VEN1, VEN2) ..............................................................................................................................0V to VIN

Note 1: The maximum allowable power dissipation of any TA (ambient temperature) is PD(MAX) = (TJ(MAX) – TA)/θJA.

Exceeding the maximum allowable power dissipation will result in excessive die temperature, and the

regulator will go into thermal shutdown.

2: Devices are ESD sensitive. Handling precautions are recommended. Human body model, 1.5 kΩ in series

with 100 pF.

† Notice: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage

to the device. This is a stress rating only and functional operation of the device at those or any other con-

ditions above those indicated in the operational sections of this specification is not intended. Exposure to

maximum rating conditions for extended periods may affect device reliability.

‡ Notice: The device is not guaranteed to function outside its operating ratings.

ELECTRICAL CHARACTERISTICS

Electrical Characteristics: VIN1 = VEN1 = VOUT1 + 1V, VIN2 = VEN2 = VOUT2 + 1V, IOUT1 = IOUT2 = 100 µA; CIN1 =

CIN2 = COUT1 = COUT2 = 1 µF; TA = +25°C. Bold values are valid for –40°C to +125°C, unless noted. (Note 1).

Parameters

Symbol Min.

Typ.

Max.

Units Conditions

Output Voltage Accuracy

VOUT

–2.0

—

+2.0

Variation from nominal VOUT

–3.0

—

+3.0

Line Regulation

—

0.02

0.3

%/V VIN = VOUT +1V to 5.5V,

IOUT = 100 µA

Load Regulation

—

IOUT = 100 µA to 300 mA

Dropout Voltage

VDO

—

190

IOUT = 150 mA

—

160

380

IOUT = 300 mA

Ground Pin Current

IGND

—

µA

VEN1 = High; VEN2 = Low;

IOUT2 = 0 mA

—

VEN1 = Low; VEN2 = High;

IOUT1 = 0 mA

—

110

VEN1 = VEN2 = High;

IOUT1 = IOUT2 = 0 mA

Ground Pin Current

IGND

—

µA

VEN1 = High; VEN2 = Low;

IOUT1 = 300 mA

—

VEN1 = Low; VEN2 = High;

IOUT2 = 300 mA

—

130

VEN1 = VEN2 = High;

IOUT1 = IOUT2 = 300 mA

Note 1: Specification for packaged product only.

MIC5396 bảng dữ liệu(PDF) 3 Page - Microchip Technology

MIC5396 bảng dữ liệu(HTML) 3 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26

bảng dữ liệu tải về

Link URL