ADA4097-1BUJZ-R5 datasheet(10/31 Pages) AD

10 / 31 page

Data Sheet

ADA4097-1/ADA4097-2

PIN CONFIGURATIONS AND FUNCTION DESCRIPTIONS

analog.com

Rev. A | 10 of 31

Figure 4. Pin Configuration for the ADA4097-1 6-Lead TSOT

Table 6. Pin Function Descriptions for ADA4097-1 6-Lead TSOT

Pin No.

Mnemonic

Description

VOUT

Amplifier Output.

−VS

Negative Power Supply. In single-supply applications, the −VS pin is normally soldered to a low impedance ground plane. In split-supply

applications, bypass the −VS pin with a capacitance of at least 0.1 μF to a low impedance ground plane, as close to the −VS pin as possible.

+IN

Noninverting Input of the Amplifier.

−IN

Inverting Input of the Amplifier.

SHDN

Op Amp Shutdown. The threshold for shutdown is approximately 1 V above the negative supply. If the SHDN pin is hard tied to −VS or floating,

the amplifier is active. If the SHDN pin is asserted high (VSHDN > −VS + 1.5 V), the amplifier is placed in a shutdown state, and the output of the

amplifier goes to a high impedance state. If the SHDN pin is left floating, it is recommended to connect a small capacitor of 1 nF between the

SHDN pin and the −VS pin to prevent signals from the −IN pin from capacitively coupling to the SHDN pin.

+VS

Positive Power Supply. Bypass the +VS pin with a capacitance of at least 0.1 μF to a low impedance ground plane, as close to the +VS pin as

possible.

Figure 5. Pin Configuration for ADA4097-2 8-Lead SOIC_N and 8-Lead MSOP

Table 7. Pin Function Descriptions for ADA4097-2 8-Lead SOIC_N and 8-Lead MSOP

Pin No.

Mnemonic

Description

VOUT1

Amplifier Output, Channel 1.

−IN1

Inverting Input of the Amplifier, Channel 1.

+IN1

Noninverting Input of the Amplifier, Channel 1.

−VS

Negative Power Supply. In single-supply applications, the −VS pin is normally soldered to a low impedance ground plane. In split-supply

applications, bypass the −VS pin with a capacitance of at least 0.1 μF to a low impedance ground plane, as close to the −VS pin as possible.

+IN2

Noninverting Input of the Amplifier, Channel 2.

−IN2

Inverting Input of the Amplifier, Channel 2.

VOUT2

Amplifier Output, Channel 2.

+VS

Positive Power Supply. Bypass the +VS pin with a capacitance of at least 0.1 μF to a low impedance ground plane, as close to the +VS pin as

possible.

ADA4097-1BUJZ-R5 bảng dữ liệu(PDF) 10 Page - Analog Devices

ADA4097-1BUJZ-R5 bảng dữ liệu(HTML) 10 Page - Analog Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31

bảng dữ liệu tải về

Link URL